The Ford Barn

Ian in Mississauga · 03-24-2023, 07:44 PM

Years ago I removed a relay similar to the one Brattons sells (red,yellow and black wires). I saved the relay and now I want to use it again but I can�t find the instructions. Can anyone help?.
Thanks, Ian

Bob C · 03-24-2023, 08:54 PM

Here's a link to Bratton's instructions. https://www.brattons.com/PDFs/20040%...%20DIAGRAM.pdf

nkaminar · 03-25-2023, 07:26 AM

Ian, Did you get hit with the bad weather?

If the instructions that Bob linked to don't work, use and ohm meter. Two wires will be open and those hook from ground to the side of the horn not coming from the battery. The other two wires will have some small resistance and those will be the activating coil. Hook one to the battery and one to the horn switch. In both cases polarity does not matter.

Another way to hook it up is for the two wires that are open, one to the battery and the other to ether side of the horn terminals. The other side of the horn terminal will then go to ground. That way the horn does not have a constant hot wire.

nkaminar · 03-27-2023, 06:55 AM

Sponsored Links (Register now to hide all advertisements)

Ian, Are you OK after the storm in Mmiissiissiippii?

03-24-2023, 07:44 PM	#1
Ian in Mississauga Senior Member Join Date: May 2010 Posts: 136	Horn relay Years ago I removed a relay similar to the one Brattons sells (red,yellow and black wires). I saved the relay and now I want to use it again but I can�t find the instructions. Can anyone help?. Thanks, Ian

03-24-2023, 08:54 PM	#2
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,321	Re: Horn relay Here's a link to Bratton's instructions. https://www.brattons.com/PDFs/20040%...%20DIAGRAM.pdf

03-25-2023, 07:26 AM	#3
nkaminar Senior Member Join Date: Jan 2012 Location: Western North Carolina Posts: 2,934	Re: Horn relay Ian, Did you get hit with the bad weather? If the instructions that Bob linked to don't work, use and ohm meter. Two wires will be open and those hook from ground to the side of the horn not coming from the battery. The other two wires will have some small resistance and those will be the activating coil. Hook one to the battery and one to the horn switch. In both cases polarity does not matter. Another way to hook it up is for the two wires that are open, one to the battery and the other to ether side of the horn terminals. The other side of the horn terminal will then go to ground. That way the horn does not have a constant hot wire. __________________ A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. Last edited by nkaminar; 03-25-2023 at 07:32 AM.

03-27-2023, 06:55 AM	#4
nkaminar Senior Member Join Date: Jan 2012 Location: Western North Carolina Posts: 2,934	Re: Horn relay Sponsored Links (Register now to hide all advertisements) Ian, Are you OK after the storm in Mmiissiissiippii? __________________ A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode