Ammco brake shoe chart

[34fordy]

I am looking for Ammco 4181 chart that lists the proper gage plate and sleeve when arcing shoes with fixed anchors. Used on the 890 grinder with the
8250 fixed anchor shoe clamp. I would like to buy a copy if possible. I can not seem to find any info on this chart. Thanks,, Don

[BILL WILLIAMSON]

Can't help you, Don, but I remember that chart well & it's a MUST to have!
Hopefully someone can at least post a COPY & you might be able to enlarge it.
Bill W.

[Fullraceflathead]

I would also like a copy as I own the same machine.

[Mikeinnj]

[QUOTE=Fullraceflathead;1270339]I would also like a copy as I own the same machine.[/QUOT

Yea I would also like several copies.....

[34fordy]

Thanks for the replies A -Men---If I ever find one I will surely let you all in on a copy somehow--There has to be a few out there somewhere!! Don

[KR500]

Sponsored Links (Register now to hide all advertisements)

I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.

[Fullraceflathead]

Originally Posted by KR500

I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.

Thank you Sir!
[email protected]
[email protected]

[BILL WILLIAMSON]

Originally Posted by KR500

I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.

KR,
YOU'RE A GREAT DUDE, TO DO THIS
Bill W.

[sphanna]

KR 500: thank you very much. [email protected]

[34fordy]

Originally Posted by 34fordy

I am looking for Ammco 4181 chart that lists the proper gage plate and sleeve when arcing shoes with fixed anchors. Used on the 890 grinder with the
8250 fixed anchor shoe clamp. I would like to buy a copy if possible. I can not seem to find any info on this chart. Thanks,, Don

KR500 has generously scanned and sent copies to those of us who needed this VERY hard to find literature--I had searched extensively on the internet with no luck until Dan responded--Another great example of the great help available from the fine members of the FORDBARN--

THANKS DAN !!!!!!!!!!!!!!!!!!!!!

[iowa30tudor]

Hello, I would also like a chart please. Our local Model A club has a machine we are trying to get running.

My email is [email protected]

Thanks! David

[Phil ip m. Allison]

Originally Posted by KR500

I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.

Do you still have the copy of the 4181 Ammco chart? If so please send it to me at; [email protected] Also if you do not mind please enclose your phone number I would like to discuss the procedure for the 890.

Thank You Phil

[Kevin in NJ]

Originally Posted by Phil ip m. Allison

Do you still have the copy of the 4181 Ammco chart? If so please send it to me at; [email protected] Also if you do not mind please enclose your phone number I would like to discuss the procedure for the 890.

Thank You Phil

Check your PM on this site.

[bornjohn]

I’d like a copy of the fore mentioned chart if anyone would be so kind. Also a place to buy parts or the gauge plate and anchor sleeve.
Thx John
[email protected]

[1930artdeco]

BornJohn, Welcome and ebay is the only place I a have seen parts. There is a gauge plate in the parts for sale section here though.


Mike

[ploeger_miles]

Originally Posted by KR500

I have the 4181 chart. I wanted to get the gage adapter to do some Lincoln 12 inch shoes which used a fixed anchor. Tried Ammco and all parts for the shoe arcing machines was scrapped when the asbestos dust issue opened up. The chart is about 20 inches tall two sided. Ihave the charts for both the 4140 and 8250 clamps. Send me your email or PM me and I will scan and send to you in an email. NO charge of course.

I am also in need of this chart. Can someone send this to me as well? My address is [email protected]

Thanks guys!

[Jim Mason]

I would be interested in a copy. tia, Jim

Jmason @ chartermi dot net

[steve hackel]

Please add me to your list [email protected] Thanks, Steve

[briphaeton]

thank you KR500 !!!
[email protected]

[grantsauder]

I too would like a copy of the Ammco 8250 chart. I have an Ammco 9250 machine .Grant

Email [email protected]

[RonC]

Can anyone share a copy of this chart? Thank you Ron
[email protected]

[rich b]

I would also much appreciate a copy of the chart if anyone is willing to share.

[email protected]

[redmodelt]

While he has been on line in the V8 section today, this one is from 2016-17 so you might send a PM or email to get his attention because he may not be looking in the Model A section.

[ploeger_miles]

Has anyone heard from kr500? I posted on the forum, sent a PM, and also sent an email and haven't seen a response yet.

[redmodelt]

Deleted because he has seen this.

[KR500]

Sponsored Links (Register now to hide all advertisements)

I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.

[rich b]

Originally Posted by KR500

I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.

Thank you for sending the information.

[daileyrepair]

I'm also in need of the ammco 4181 chart. Does any one have one? Also I could use some more of the gauge plates and anchor sleeves. Does any one have any to sell?

[ed thibodeau]

Pease put me on the list. Thank you EBTHIB@MSN. COM

[daileyrepair]

My email is [email protected]

[Robinnc]

I realize this is an old thread.I came across it yesterday in my search. I have an Ammco 890 arc grinder with a 8250 fixed anchor shoe clamp.

I’m searching for the gauge plates and sleeves. If anyone has a set you’d part with or perhaps trace the plates and measure the sleeves so I could have some made I’d sure appreciate it. I’ve been searching for a while and it seems I might as well be looking for dinosaurs.

I too would appreciate a copy of the chart just in case I find the plates and sleeves.

[email protected].

Thanks

[Gary WA]

Originally Posted by Robinnc

I realize this is an old thread.I came across it yesterday in my search. I have an Ammco 890 arc grinder with a 8250 fixed anchor shoe clamp.

I’m searching for the gauge plates and sleeves. If anyone has a set you’d part with or perhaps trace the plates and measure the sleeves so I could have some made I’d sure appreciate it. I’ve been searching for a while and it seems I might as well be looking for dinosaurs.

I too would appreciate a copy of the chart just in case I find the plates and sleeves.

[email protected].

Thanks

these them

[Robinnc]

Yes those are them thanks.

Do you know where I can buy a set?

[Gary WA]

Originally Posted by Robinnc

Yes those are them thanks.

Do you know where I can buy a set?

NO I don't

[Jim Mason]

Here's the manual

[mechanicalarts]

Originally Posted by KR500

I have sent about a dozen emails out to those requesting the Ammco brake shoe arcer charts. If you don't receive a copy PM me and I will accommodate your request.

KR500,

Hi, I hope this message finds you well. I know this is an older post, but since I'm a new member I am not yet allowed to send private messages. I see you've been able to provide Ammco reference chart #4181 to other users on this forum, and I was hoping you could do the same for me. I just purchased a Model 890 Brake Shoe Arc Grinder with the #8250 brake shoe clamp, and have most everything I need for it except the reference chart. My email is [email protected] if you'd prefer to contact me there. Any help would be greatly appreciated!

Many thanks,
-Phil

[mechanicalarts]

Anyone on here who got a copy of the #4181 chart that would like to share? Need one for my machine.

Many thanks!
-Phil

[GA30Pickup]

KR500,
I have recently inherited an 890 Saf-Arc with 8250 clamp and shims, but need the gold plated list you mentioned having. If you are still willing to send a copy, or if anyone else that got a copy can forward it, I would greatly appreciate it. Since I'm fairly new, and haven't posted the minimum number of times it won't let me PM/email anyone.
My email is rileydarren @ johndeere.com

Thanks,
Darren