Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-08-2015, 10:48 PM   #1
Drive Shaft Dave
Senior Member
 
Join Date: Dec 2011
Location: New hope Minnesota
Posts: 742
Default Technical Questions To Jerry Wilhelm

While looking at the Model A News, Nov, Dec there is an article about the gas gage from Steve Plucker P.O.Box 341 The Dalles,OR 97058. The date is 1979. This is from A magazine I picked up A couple of years ago , I thought Steve would remember it. It was Technical questions to Jerry Wilhelm.
Drive Shaft Dave is offline   Reply With Quote
Old 09-08-2015, 11:26 PM   #2
Steve Plucker
BANNED
 
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
Default Re: Technical Questions To Jerry Wilhelm

Dave,

Ahhhh...I do remember The Dalles, Oregon! Nothing like living on the Columbia River in the most beautiful gorge in the world...The Columbia River Gorge!

Darn, that was a long time ago for sure...I will have to look at the letter to Jerry. Haaa...I wrote him so many times asking questions about this and that, that the USPS made some money from both of us for sure.

I was 29 then and belive it or not kept all those correspondance to Jerry and others who had helped me with the restoration of my September 1929 Standard Coupe.

That was 36 years ago and if some of you remember those days, what was accomplished then when you wanted information on a particular subject, it took weeks to hear back from someone on your technical questions so you could continue the restoration due to snail mail. NOW, it only takes for the most part, a few days, or less, to get an answer to your technical questions due to the internet and websites such as Ford Barn, MAFCA, MARC, ect.

Oh, Can't forget about the Judging Standards as they were called then...I think they were out then...or close to it...Just a few sheets of paper...I think...Anyone?

Thanks for the memories David!

Pluck

Last edited by Steve Plucker; 09-08-2015 at 11:41 PM.
Steve Plucker is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-08-2015, 11:37 PM   #3
Drive Shaft Dave
Senior Member
 
Join Date: Dec 2011
Location: New hope Minnesota
Posts: 742
Default Re: Technical Questions To Jerry Wilhelm

Sponsored Links (Register now to hide all advertisements)
You are welcome, I have had this Model A News Magazine for several years now and after reading the tech letters , I realised It was you. Your articles in the publications are amazing . My favorite was the one on the 30 31 gas tank, keep up the good work.
Drive Shaft Dave is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:07 AM.