|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-03-2016, 10:08 AM | #1 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Adjusting Clutch
We have put the multi disc clutch setup back in our fire truck as original We also put the correct transmission in it .Clutch was rebuilt. I took it for its first ride yesterday and right away I could smell the clutch and smoke started coming from the inspection hole. It shifted fine and clutch appeared to be working but obviously I must have something out of adjustment . Does this sound like a adjustment issue. What is the procedure to adjust this correctly and set clutch play for this multi disc setup . Thank you Billy
|
07-04-2016, 03:57 PM | #2 |
Senior Member
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
|
Re: Adjusting Clutch
Does anyone else use the Multi disc set up
|
Sponsored Links (Register now to hide all advertisements) |
|
07-04-2016, 05:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Adjusting Clutch
Sponsored Links (Register now to hide all advertisements)
Adjusting the clutch is the same as for the single plate clutch. When I restore my 28 I will be installing the multiplate clutch. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|