|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-13-2020, 04:39 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
1941 weatherstripping
I have looked and looked and can’t find a solid answer so here goes. I am replacing the door weatherstripping on my 2 door sedan. I think it gets installed to the door rather than the body but need confirmation before it is glued on. Thanks in advance, Dave
|
06-13-2020, 06:36 PM | #2 |
Senior Member
Join Date: Dec 2012
Location: Massillon, Ohio
Posts: 783
|
Re: 1941 weatherstripping
I have a '41 Coupe. The weather stripping is installed on the body, not the door. One strip runs from the door post forward and curves down to the first door hinge. Then on the inner part of the door the weatherstrip runs from the hinge straight down to the bottom of the door. Then on the outer part of the door where the latch pin is there is a small piece of strip at the bottom of the door. It is called "the lower back edge door seal."
There are also 2 door bumpers installed on the body where the door shuts. If you have a C&G Early Ford Parts Catalog the piece locations are shown in the Door section, pages 274 to 276. |
Sponsored Links (Register now to hide all advertisements) |
|
06-13-2020, 09:11 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
Re: 1941 weatherstripping
Thank you Joe. I’m glad I asked.
|
06-14-2020, 04:01 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
Re: 1941 weatherstripping
I’m back to being a little confused. I looked at the C&G catalog online and it shows the seals being put on the doors. Could ‘41 be different than ‘46-‘48?
|
06-14-2020, 07:31 PM | #5 |
Senior Member
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
|
Re: 1941 weatherstripping
i installed mine like the directions from Steele showed, but I had to call and find out what they were, their not easy to understand on the little scrap of paper instructions. The top goes on the body running down to the hinge's, the other piece goes on the door and runs to bottom of door where the short curved piece goes at bottom of door. hope I didn't confuse you but that what they told me and that's the way I installed mine.Mine is a 41 Business Coupe. Al
Last edited by grumppyoldman; 06-14-2020 at 07:32 PM. Reason: Add info |
06-14-2020, 08:15 PM | #6 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
Re: 1941 weatherstripping
Sponsored Links (Register now to hide all advertisements)
|
06-14-2020, 08:41 PM | #7 |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 877
|
Re: 1941 weatherstripping
Here's the pictures for you
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
06-14-2020, 08:52 PM | #8 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
Re: 1941 weatherstripping
Thank you Meric42. Where are those from?
|
06-14-2020, 11:18 PM | #9 |
Senior Member
Join Date: Aug 2010
Location: Blenheim, New Zealand
Posts: 877
|
Re: 1941 weatherstripping
__________________
I need an 01A 1453 Brkt Spare wheel hold down for my sedan delivery - PLEASE HELP Gotta love my '42 Sedan Delivery's - Now that I own the only two in New Zealand http://www.fordbarn.com/forum/album.php?albumid=580 |
06-15-2020, 01:29 AM | #10 |
Senior Member
Join Date: Jun 2010
Location: Wilbraham MA
Posts: 150
|
Re: 1941 weatherstripping
Thanks
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|