The Ford Barn

Bob Brown · 05-09-2010, 01:37 PM

Is there any way to test a condenser used on a distributor on a modern plate for a Model A Ford? I don't know if I have burned mine up or not!

Tom Wesenberg · 05-09-2010, 06:56 PM

Sponsored Links (Register now to hide all advertisements)

I have a capacitor tester. You just clip it to the leads and read the microfarads. If you don't have this, just install the condensor and check for a good blue spark at least 1/4" long. I like to test them by using them for a day or so. That way you know they are also good when hot.

05-09-2010, 01:37 PM	#1
Bob Brown Junior Member Join Date: May 2010 Posts: 18	Condenser Test? Is there any way to test a condenser used on a distributor on a modern plate for a Model A Ford? I don't know if I have burned mine up or not!

05-09-2010, 06:56 PM	#2
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Condenser Test? Sponsored Links (Register now to hide all advertisements) I have a capacitor tester. You just clip it to the leads and read the microfarads. If you don't have this, just install the condensor and check for a good blue spark at least 1/4" long. I like to test them by using them for a day or so. That way you know they are also good when hot.