The Ford Barn

ampico-kid · 06-02-2023, 02:52 PM

Just a quick question. Most of the replacement speedometer cables I see are some kind of unfinished metal. What is the correct color for the cable? I seem to recall reading somewhere that it was black? Or is the raw metal look correct? Thanks.

Gary WA · 06-02-2023, 05:16 PM

Quote:

Originally Posted by ampico-kid

Just a quick question. Most of the replacement speedometer cables I see are some kind of unfinished metal. What is the correct color for the cable? I seem to recall reading somewhere that it was black? Or is the raw metal look correct? Thanks.

Housing Raven finish,Cable clips-black,Bolts/lock washers-Raven finish

ampico-kid · 06-02-2023, 05:35 PM

Quote:

Originally Posted by Gary WA

Housing Raven finish,Cable clips-black,Bolts/lock washers-Raven finish

Is the outer cable casing considered part of the "housing"? If so, then it would be a Raven finish?

Gary WA · 06-02-2023, 08:20 PM

Quote:

Originally Posted by ampico-kid

Is the outer cable casing considered part of the "housing"? If so, then it would be a Raven finish?

Yes As Per Standards

Gregb · 06-04-2023, 07:41 PM

Is there a method to reproduce the "Raven" finish or do most folks just paint them flat black? New model A owner wants to know.

Gregb

ampico-kid · 06-04-2023, 08:04 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Gregb

Is there a method to reproduce the "Raven" finish or do most folks just paint them flat black? New model A owner wants to know.

Gregb

I have a very nice looking car, but by no means a car adhering to strict stock Model A standards. I'm going to paint the cable with satin black rattle can paint, let it cure for a few days, and install it. I guess if you were a super purist, that's not the way to go, but that's not where I'm at.

Gary WA · 06-04-2023, 08:14 PM

Quote:

Originally Posted by ampico-kid

I have a very nice looking car, but by no means a car adhering to strict stock Model A standards. I'm going to paint the cable with satin black rattle can paint, let it cure for a few days, and install it. I guess if you were a super purist, that's not the way to go, but that's not where I'm at.

That's how I would do it or just leave it with out painting it! If not for points.

Gregb · 06-05-2023, 07:03 AM

OK thanks, not worried about points. I will leave it as is

Gregb

rotorwrench · 06-05-2023, 11:01 AM

Raven was likely a black phosphate coating. The phosphate coatings can start to corrode in certain environments. I always rube some motor oil on them now and then.

06-02-2023, 02:52 PM	#1
ampico-kid Member Join Date: Mar 2015 Location: Harpers Ferry, WV Posts: 97	Speedo Cable color Just a quick question. Most of the replacement speedometer cables I see are some kind of unfinished metal. What is the correct color for the cable? I seem to recall reading somewhere that it was black? Or is the raw metal look correct? Thanks.

06-04-2023, 07:41 PM	#5
Gregb Junior Member Join Date: May 2023 Location: Alberta Canada Posts: 7	Re: Speedo Cable color Is there a method to reproduce the "Raven" finish or do most folks just paint them flat black? New model A owner wants to know. Gregb

06-05-2023, 07:03 AM	#8
Gregb Junior Member Join Date: May 2023 Location: Alberta Canada Posts: 7	Re: Speedo Cable color OK thanks, not worried about points. I will leave it as is Gregb

06-05-2023, 11:01 AM	#9
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,425	Re: Speedo Cable color Raven was likely a black phosphate coating. The phosphate coatings can start to corrode in certain environments. I always rube some motor oil on them now and then.