|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-21-2023, 07:00 AM | #1 |
Senior Member
Join Date: Sep 2011
Posts: 171
|
Horn Not Working
Pressing horn button no sound. Horn is ok and new wire in hord rod a few years ago. It is a 1928. Previous a few weeks back the horn just made the the gah sound no ahoo. What could be the issue?
|
05-21-2023, 09:19 AM | #2 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,145
|
Re: Horn Not Working
Bad connection or dirty horn button contacts. Button sometimes improved by pressing in and rotating to scrub off the dirt/ corrosion.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-21-2023, 09:29 AM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,431
|
Re: Horn Not Working
The horns all had felt pads at the bearing areas where the armature turns in the field frame assembly. They need a drop or two of oil on the felt pads periodically to keep them turning smoothly. The brushes wear and need replacement when worn down to limits.
Make sure that the battery power is getting to the horn. Make sure the horn button is grounding the horn as it should. Test the horn with a battery and some jumper leads if you have some. They have a shunt wound field so it doesn't matter which wire is connected to which terminal. It should function either way. The horn may need some adjustments but take it slow and don't put too much adjustment in or it may have too much friction to operate. (link) https://modelagarage.com/service_bul...0is%20obtained. |
05-21-2023, 01:26 PM | #4 |
Senior Member
Join Date: Sep 2011
Posts: 171
|
Re: Horn Not Working
Thanks all.
|
05-22-2023, 08:21 AM | #5 |
Senior Member
Join Date: May 2010
Location: Spruce Pine, NC
Posts: 1,458
|
Re: Horn Not Working
Sponsored Links (Register now to hide all advertisements)
"horn broken, watch for finger" seriously, hot wire the horn directly to battery. if it works you either have loose, corroded wiring or a problem in the button. process of elimination, just takes some time.
__________________
our next Model A is out there in the unknown...... |
|
|
Sponsored Links (Register now to hide all advertisements) |
|