The Ford Barn

Blindhuckster · 06-26-2023, 09:52 AM

Someone in the past had done a poor job patching the driver's side floor pan right in front of the seat at one time. The passenger side has a couple holes, but not nearly as bad as the driver side. Does anyone have any experience with these floor pans listed on Ebay or is there another supplier that I don't know about? Thanks in advance. Nate Anello

https://www.ebay.com/itm/28525435677...&segname=11304

19Fordy · 06-26-2023, 10:13 AM

They are made of 19 gage steel. Is that the correct thickness for your car?
Contact the company and see if they will make them for you out of a different gage thickness, if needed.

Blindhuckster · 06-28-2023, 07:01 AM

Well, after searching for other suppliers of floor pans for my 37, I found another company,
Classic 2 Current Fabrication that sells US made pans. From the pictures, the pattern looks close. They seem to have good reviews. Since I don't have any metal shaping equipment, decided I'd give these a try. Won't need the entire piece, just a couple sections. Will report back when they arrive and after I get them welded in. Nate Anello

Zeke3 · 06-28-2023, 01:43 PM

I didn’t think much of the ribs in the EBay replacement floors, so I will be interested to see how your repairs turn out. The floors in my ‘37 need repair in the cowl areas and under the front seat on the right side.

petehoovie · 06-28-2023, 01:52 PM

Quote:

Originally Posted by Blindhuckster

Well, after searching for other suppliers of floor pans for my 37, I found another company,
Classic 2 Current Fabrication that sells US made pans. From the pictures, the pattern looks close. They seem to have good reviews. Since I don't have any metal shaping equipment, decided I'd give these a try. Won't need the entire piece, just a couple sections. Will report back when they arrive and after I get them welded in. Nate Anello

Classic 2 Current Fabrication - https://www.c2cfabrication.com/searc...prefix%5D=last

1937-1938 Ford Cabriolet Coupe & Convertible Full Length Floor Pan RH

$ 150.00 | $ 162.00

1937-1938 Ford Cabriolet Coupe & Convertible Full Length Floor Pan LH

$ 150.00 | $ 162.00

Blindhuckster · 06-28-2023, 04:00 PM

Sponsored Links (Register now to hide all advertisements)

I'll for sure let you know. I just didn't see a lot of options. I was going to buy a bead roller but didn't think I'd use it more than once. If I was doing a concourse restoration, I'd explore other options. But for now, just trying to fix a previously done poor repair. Nate

ssffnomad · 06-28-2023, 04:04 PM

Yes, fix it so you can drive it.
Good Luck , Stretch

barnfind · 06-28-2023, 04:57 PM

I think the company is Livonia, MI is the eBay company. I bought a set a few years back but haven't used them yet.

06-26-2023, 09:52 AM	#1
Blindhuckster Senior Member Join Date: Mar 2020 Location: Lee's Summit, MO Posts: 101	37 Deluxe Coupe Floor Pans Someone in the past had done a poor job patching the driver's side floor pan right in front of the seat at one time. The passenger side has a couple holes, but not nearly as bad as the driver side. Does anyone have any experience with these floor pans listed on Ebay or is there another supplier that I don't know about? Thanks in advance. Nate Anello https://www.ebay.com/itm/28525435677...&segname=11304

06-26-2023, 10:13 AM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,950	Re: 37 Deluxe Coupe Floor Pans They are made of 19 gage steel. Is that the correct thickness for your car? Contact the company and see if they will make them for you out of a different gage thickness, if needed.

06-28-2023, 07:01 AM	#3
Blindhuckster Senior Member Join Date: Mar 2020 Location: Lee's Summit, MO Posts: 101	Re: 37 Deluxe Coupe Floor Pans Well, after searching for other suppliers of floor pans for my 37, I found another company, Classic 2 Current Fabrication that sells US made pans. From the pictures, the pattern looks close. They seem to have good reviews. Since I don't have any metal shaping equipment, decided I'd give these a try. Won't need the entire piece, just a couple sections. Will report back when they arrive and after I get them welded in. Nate Anello

06-28-2023, 01:43 PM	#4
Zeke3 Senior Member Join Date: Dec 2014 Location: Columbus, IN Posts: 1,407	Re: 37 Deluxe Coupe Floor Pans I didn’t think much of the ribs in the EBay replacement floors, so I will be interested to see how your repairs turn out. The floors in my ‘37 need repair in the cowl areas and under the front seat on the right side.

06-28-2023, 04:00 PM	#6
Blindhuckster Senior Member Join Date: Mar 2020 Location: Lee's Summit, MO Posts: 101	Re: 37 Deluxe Coupe Floor Pans Sponsored Links (Register now to hide all advertisements) I'll for sure let you know. I just didn't see a lot of options. I was going to buy a bead roller but didn't think I'd use it more than once. If I was doing a concourse restoration, I'd explore other options. But for now, just trying to fix a previously done poor repair. Nate

06-28-2023, 04:04 PM	#7
ssffnomad Senior Member Join Date: Aug 2021 Location: Upstate N.Y. Posts: 443	Re: 37 Deluxe Coupe Floor Pans Yes, fix it so you can drive it. Good Luck , Stretch

06-28-2023, 04:57 PM	#8
barnfind Senior Member Join Date: Jan 2011 Posts: 426	Re: 37 Deluxe Coupe Floor Pans I think the company is Livonia, MI is the eBay company. I bought a set a few years back but haven't used them yet.