|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-21-2019, 12:04 PM | #1 |
Member
Join Date: May 2017
Location: Cocoa Beach, FL
Posts: 41
|
Top Iron Kit Instructions
I bought a top iron kit for my 1929 phaeton and it does not have an instruction sheet for the assembly. Both Brattons and Macs tell me the supplier doesn't have instructions. Does anybody out there still have an assembly instruction for a top iron kit they could email to me?
|
05-21-2019, 12:23 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,984
|
Re: Top Iron Kit Instructions
I had some new top irons for a roadster and they were fully assembled each side. What is it you want to know?
|
Sponsored Links (Register now to hide all advertisements) |
|
05-21-2019, 06:59 PM | #3 |
Member
Join Date: May 2017
Location: Cocoa Beach, FL
Posts: 41
|
Re: Top Iron Kit Instructions
Well, a roadster is a little different than a phaeton. The roadster has 3 bows, the phaeton has 4. The roadster has one iron assembly on each side, all connected. The phaeton has the 3 connected plus one standalone bar on each side to the windshield. My kit has a lot of bolts and rivets which I am not sure where they go. So I need some instruction on how to assemble the bows and rivets and bolts.
|
05-21-2019, 07:48 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,984
|
Re: Top Iron Kit Instructions
I once owned a '28 Touring and don't know what parts would use the bolts and rivets. Good luck with it. Maybe someone will post some photos for you. Could you set out the parts and provide a photo of what they sent you?
Last edited by J Franklin; 05-21-2019 at 08:00 PM. |
05-22-2019, 12:14 AM | #5 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Top Iron Kit Instructions
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|