|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-22-2023, 09:35 PM | #1 |
Member
Join Date: Sep 2010
Posts: 46
|
Clutch disk - 4 speed transmission
I have a 4 speed transmission that I believe started it life in a ford 150 truck. It was adapted to fit a Model A. I am searching for a part number for the clutch disc. The hub of the Model A clutch disc is too large. Any help would be very much appreciated.
|
05-22-2023, 11:20 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: Clutch disk - 4 speed transmission
Find the disk for that year transmission.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-23-2023, 07:52 AM | #3 |
Member
Join Date: Sep 2018
Posts: 88
|
Re: Clutch disk - 4 speed transmission
The disc that fits the 1984 - 1987 F150 truck will not work in the Model A adaption. Disc to large diameter.
I ordered and received one that will work last month. It is installed now. Part number D923. Ordered thru Auto Zone. Clutch disc fits the 1969 Ford Falcon with a 200 cu in engine. |
05-23-2023, 04:45 PM | #4 |
Member
Join Date: Sep 2010
Posts: 46
|
Re: Clutch disk - 4 speed transmission
The F 150's had n 11" disc where mine is 9". Thanks for responding.
|
05-23-2023, 04:47 PM | #5 |
Member
Join Date: Sep 2010
Posts: 46
|
Re: Clutch disk - 4 speed transmission
I am off too Auto Zone to place an order. I assume you have the converted F 150 Transmission as I do. Easy to drive with it but a little tough on some hills.
Thanks for your response. Bob |
05-23-2023, 05:28 PM | #6 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,160
|
Re: Clutch disk - 4 speed transmission
Sponsored Links (Register now to hide all advertisements)
__________________
AL in NY |
05-26-2023, 03:04 PM | #7 |
Member
Join Date: Sep 2010
Posts: 46
|
Re: Clutch disk - 4 speed transmission
Thank You for your response. I have ordered that part.
Bob |
05-26-2023, 04:23 PM | #8 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 1,973
|
Re: Clutch disk - 4 speed transmission
This is great information guys. My local NAPA store has one counter clerk that knows about parts. I have a streetrod, that I did not engineer. The original builder died. Sometimes finding the right part is like a treasure hunt. I have helped myself more than anything, or any one else. That one good counter person is not too bad, but I have to point him in a direction.
AutoZone is a complete joke as far as parts knowledge. Advance is not too bad if I get one guy. He does at least try. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|