|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-04-2017, 08:50 PM | #1 |
Member
Join Date: May 2010
Location: Mayville WI
Posts: 52
|
new king pins all the same?
just wondering if most of the king pin sets are the same quality or is there some better or worse than others.Or are they all made by the same guy. Its for a 46 ford. I was looking at the moogs.Thanks
|
01-04-2017, 10:44 PM | #2 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,064
|
Re: new king pins all the same?
Google Moog, ask if they are made in the united states.
They were a quality brand name in the past. Bruce
__________________
Works good Lasts long time |
Sponsored Links (Register now to hide all advertisements) |
|
01-05-2017, 01:43 PM | #3 |
Senior Member
Join Date: Aug 2010
Location: New Zealand
Posts: 1,111
|
Re: new king pins all the same?
I can't identify the brand we had as it a plain box. But the machinist has major problems after going through his normal procedure of fitting the bushes in the 46 spindles. The King pins bound up part ways through each turn . Double checked every thing and finally found faulty kingpins they checked round but had an odd spiral high spot the full length. Don't know how to check for this , the next set were better but not perfect as he said.
|
01-05-2017, 04:48 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,422
|
Re: new king pins all the same?
There are different thrust plate bearings in some of the off shore stuff that have pretty small ball bearings in them. I like to see some good photos of them before I buy but most of my stuff is Mercury. They are a bit harder to source good ones with the OEM type thrust bearings with the larger ball bearings in them.
|
01-05-2017, 05:18 PM | #5 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,741
|
Re: new king pins all the same?
|
01-05-2017, 08:24 PM | #6 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,029
|
Re: new king pins all the same?
Sponsored Links (Register now to hide all advertisements)
|
01-06-2017, 09:24 AM | #7 |
Member
Join Date: May 2010
Location: Mayville WI
Posts: 52
|
Re: new king pins all the same?
I got ahold of moog and asked them where they were made and they were like a politician.they told me they make there product world wide and I would have to look at box. in other words china
|
01-06-2017, 09:27 AM | #8 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,921
|
Re: new king pins all the same?
According to this video MOOG parts are made all over the world - 16 different countries.
https://www.youtube.com/watch?v=O17uF6A6aiw |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|