Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-23-2020, 02:57 PM   #1
Superhart
Member
 
Superhart's Avatar
 
Join Date: Nov 2019
Location: Cinnaminson, NJ
Posts: 49
Default Need Help: '30 Coupe Window Regulator

I need to remove the window regulator on the driver side of my 1930 Coupe with three screw mounting. The window glass drops an inch or so when rolled up completely. Seems like the regulator may need new springs. Otherwise it raises and lowers properly. I already have the trim panel removed but not sure how to disengage the regulator from the window lift channel. Never did this before so looking to you guys who have done this removal to help me avoid costly mistakes. If anyone can either describe the removal process or point me to an article or video describing how to do the deed would be greatly appreciated. Thanks in advance.
Superhart is offline   Reply With Quote
Old 10-23-2020, 06:33 PM   #2
SteveB31
Senior Member
 
SteveB31's Avatar
 
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,305
Default Re: Need Help: '30 Coupe Window Regulator

Sponsored Links (Register now to hide all advertisements)
Roll the window down. Remove the three screws from the regulator. Slide the arm off the window lower metal channel. Done
SteveB31 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:25 PM.