|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-28-2019, 05:10 PM | #1 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Quick Jack Car Lift
Has anyone used a Quick Jack Car Lift to lift a Model A? A freind is thinking of buying one but is unsure if it will work for his Model A...
https://www.quickjack.com/car-lifts/bl-3500slx/ |
10-28-2019, 05:33 PM | #2 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: Quick Jack Car Lift
I have one, but I haven’t used it on my Model A. One disappointment with the lift is that the fittings leak transmission fluid from the very first time I used it. I bought it new.
Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
10-28-2019, 05:52 PM | #3 |
Member
Join Date: Jun 2016
Location: SoCal
Posts: 47
|
Re: Quick Jack Car Lift
Costco occasionally has the model rated at 5000# on sale for about $1,000. If there is not an immediate need.....
|
10-28-2019, 09:13 PM | #4 |
Senior Member
Join Date: Jun 2011
Location: Oakton, VA
Posts: 437
|
Re: Quick Jack Car Lift
Your friend will need to buy extra rubber blocks because the Quickjack's touch-points are the frame and the Model A frame is high off the ground relative to a modern car.
I use my Quickjack on a '57 Ford and an older Corvette. I don't use it on my Model A's. I do find that when the Quickjack returns to the floor, it tends to "crab" sideways about 1/2" so you must recheck the lift points before bringing it up again. |
10-28-2019, 09:42 PM | #5 |
Senior Member
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
|
Re: Quick Jack Car Lift
I was going to pass on a reply to this but I decided to come back with my two cents. For me... I can't crawl around under a car like I used to, that system looke like it would not lift very high and I question it's stbility. Personally I would save a few more hard earned dollars and purchase a good 4-poster, I could stand under the car to work on it in comfort, perhaps it would be safer and you could store another ???? on top or bottom. They even come with drip trays..... if your A drips!
|
10-28-2019, 09:44 PM | #6 |
Senior Member
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
|
Re: Quick Jack Car Lift
Sponsored Links (Register now to hide all advertisements)
|
10-28-2019, 11:34 PM | #7 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Quick Jack Car Lift
Thanks for the replies so far. I will pass them along. No problem with the typing, PalAl. I have FFS myself . (Fat Finger Syndrome).
Quote:
I was wondering about the stability myself. I don't think I would feel comfortable without Jack Stands. But then again I have never seen a Quick Jack in person either. Last edited by Y-Blockhead; 10-28-2019 at 11:46 PM. |
|
10-29-2019, 04:43 AM | #8 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,159
|
Re: Quick Jack Car Lift
Hallo "Mr. Blockhead".
A friend of mine has a similar device. He uses this for the Citroen 11 CV. This is easy, because he can easily be lifted at the side sills. But he would not buy this jack anymore. It does not go high enough for lazy work. And the many struts do much disturb. Personally, I bought a big lifter like the auto repair service uses. With that I can lift >3 feet. This is much faster and easier for the A frame.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version Last edited by Werner; 10-29-2019 at 05:39 AM. Reason: Corrections |
10-29-2019, 06:44 AM | #9 |
Senior Member
Join Date: Dec 2013
Location: Mossel Bay, about 300km from Cape Town
Posts: 530
|
Re: Quick Jack Car Lift
In a few short weeks I dug a pit in my garage, bricked up the walls and steps. Chop, chop and very cost effective.
__________________
Regards Chris Cape Town 28 Model A RPU, 29 Chevy Phaeton, 67 E Type FHC, 67 250SL Pagoda, 83 911 SC |
10-29-2019, 07:26 AM | #10 | |
Senior Member
Join Date: Nov 2018
Location: North Eastern MD
Posts: 486
|
Re: Quick Jack Car Lift
Quote:
|
|
10-29-2019, 10:00 AM | #11 |
Senior Member
Join Date: Aug 2012
Posts: 882
|
Re: Quick Jack Car Lift
Pits are frowned upon in our area as heavier than air gases tend to collect in them until they become lethal or explosive. You hardly ever see a muffler shop anymore with a pit.
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
10-29-2019, 10:09 AM | #12 |
Senior Member
Join Date: Jul 2018
Location: Daniel Island,SouthCarolina/Knoxville, Tennessee/Sanibel Island,Florida
Posts: 292
|
Re: Quick Jack Car Lift
Hopefully I am not hi-jacking this thread but seems like the logical place to ask this.
Is there a consensus on whether it's a good practice to jack the rear of the A under the differential pumpkin or the front of the car under the center of the front axle.....and then put blocks under the wheels? fried okra |
10-29-2019, 11:36 AM | #13 |
Junior Member
Join Date: Apr 2013
Posts: 6
|
Re: Quick Jack Car Lift
That is exactly the way I do it. I never trust a jack to stay up while I am under it. Docs
|
10-29-2019, 11:57 AM | #14 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,354
|
Re: Quick Jack Car Lift
When you say "blocks under the wheels"... are you saying like wooden blocks under the tires to take the weight of the car? Seems risky to me, I always do jack stands under the axle.
|
10-29-2019, 12:22 PM | #15 |
Senior Member
Join Date: Jul 2018
Location: Daniel Island,SouthCarolina/Knoxville, Tennessee/Sanibel Island,Florida
Posts: 292
|
Re: Quick Jack Car Lift
Was thinking maybe using solid wood 2x10 blocks, or solid cement blocks, or my metal car ramps under the wheels.
I've got some good jack stands but never really trusted being under the car using them. thanks, fried okra |
10-29-2019, 12:46 PM | #16 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,354
|
Re: Quick Jack Car Lift
Ramps are OK as long as you keep your body under where the ramps are, so if the car were to roll off it wouldn't injure you. Jack stands are the standard way to elevate a car (other than a lift). The Quick Jack is like a hybrid between blocks and stands – the key thing is that the block or stand is not under a wheel, so that there's no risk of the car somehow rolling off the support object.
|
10-29-2019, 12:54 PM | #17 |
Senior Member
Join Date: Jul 2018
Location: Daniel Island,SouthCarolina/Knoxville, Tennessee/Sanibel Island,Florida
Posts: 292
|
Re: Quick Jack Car Lift
Gotcha!
I always leave the vehicle in gear, with parking brake on, and chocks fore and aft of the rear wheels when using ramps. thx, fried okra |
10-29-2019, 01:53 PM | #18 |
Senior Member
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 985
|
Re: Quick Jack Car Lift
I always get an uneasy feeling being underneath a vehicle - even though I always use jack stands.
__________________
Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria |
10-29-2019, 02:11 PM | #19 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Quick Jack Car Lift
We just use an old 55 gal. drum under the car. Don't know if this would work on a Model A tho...
|
10-29-2019, 02:28 PM | #20 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,115
|
Re: Quick Jack Car Lift
I would never ever use concrete blocks to support a car.
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
10-29-2019, 04:23 PM | #21 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Quick Jack Car Lift
When I read an earlier post sying he uses cement blocks, I was going to post the same. It is a BIG no no.
If a cement (actually, it's concrete. Cement is only an ingredient of concrete) is given a shock or overloaded os it cracks, its strength goes from 100% to 0% in a micro second where as wood will mostly retain its strength. There is less chances of wood (unless it is oily) slipping too. For your own sake (and your family), DON'T DO IT!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
10-29-2019, 05:47 PM | #22 | |
Senior Member
Join Date: May 2010
Posts: 2,789
|
Re: Quick Jack Car Lift
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
10-29-2019, 07:08 PM | #23 |
Senior Member
Join Date: May 2010
Location: Hebron, CT
Posts: 432
|
Re: Quick Jack Car Lift
A pair of car ramps placed under all 4 wheels will raise the car higher than the Quick Jack, also be safer and only cost about $80.
|
10-30-2019, 08:55 PM | #24 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: Quick Jack Car Lift
I was wondering about the stability myself. I don't think I would feel comfortable without Jack Stands. But then again I have never seen a Quick Jack in person either.[/QUOTE] It’s quite stable. It has automatic locks. Sent from my iPhone using Tapatalk |
10-31-2019, 07:15 AM | #25 |
Senior Member
Join Date: Nov 2018
Location: North Eastern MD
Posts: 486
|
Re: Quick Jack Car Lift
I have seen a couple of guys make homemade stands out of blocks of 2 x 4's. Every other layer is placed perpendicular to the previous layer. Much the same as cribbing whilst raising a building. You can go as high as you like. the last layer has the blocking going cross ways opposite the direction of the wheels which keeps it from rolling.
|
10-31-2019, 10:38 AM | #26 |
Junior Member
Join Date: Aug 2019
Location: Mid-Misouri
Posts: 2
|
Re: Quick Jack Car Lift
Sponsored Links (Register now to hide all advertisements)
|
10-31-2019, 11:02 AM | #27 | |
Member
Join Date: Jun 2016
Location: SoCal
Posts: 47
|
Re: Quick Jack Car Lift
Quote:
Don't own one. I've considered one. My concern has always been the unknowns with the concrete slab. I guess if I had built the building that would help but otherwise I would opt for a four post. (unfortunately that wont fit in my garage.) |
|
10-31-2019, 03:10 PM | #28 |
Member
Join Date: Jul 2014
Location: Everett, Wa
Posts: 84
|
Re: Quick Jack Car Lift
|
10-31-2019, 06:03 PM | #29 | |
Junior Member
Join Date: Oct 2013
Location: Honolulu, HI
Posts: 20
|
Re: Quick Jack Car Lift
Quote:
|
|
10-31-2019, 06:23 PM | #30 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: Quick Jack Car Lift
Quote:
By my calculation, it will only lift the car 8". My frame is 18" off the ground just sitting. Somethings to think about... |
|
11-01-2019, 08:51 AM | #31 |
Senior Member
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
|
Re: Quick Jack Car Lift
If you have a "pit" hide it from your insurance company.
|
11-01-2019, 12:48 PM | #32 | |
Senior Member
Join Date: Aug 2018
Posts: 2,332
|
Re: Quick Jack Car Lift
Quote:
Perhaps make/attach some spacer blocks to between the car and quick jack? |
|
11-01-2019, 01:23 PM | #33 | |
Junior Member
Join Date: Oct 2013
Location: Honolulu, HI
Posts: 20
|
Re: Quick Jack Car Lift
Quote:
https://www.ezcarlift.com/gallery/fo...odel%20A-2.jpg |
|
11-01-2019, 01:49 PM | #34 |
Senior Member
Join Date: Apr 2018
Location: Mebane NC
Posts: 2,354
|
Re: Quick Jack Car Lift
Looks like EZ Car Lift has a version for the Model A that you would order that has 45" cross-members and 6" spacer blocks. This places the lifting platform exactly under the frame on both sides, clearing the low-hanging chassis components. Costs $60 extra.
They also sell a caster accessory kit, so you could put the car on the lift and then roll the whole thing across the garage or into a storage niche. Neat product, glad to know this is out there if I need it. |
11-02-2019, 12:22 PM | #35 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: Quick Jack Car Lift
I got under my 31 Victoria today and started positioning my Quick Lift (it’s a 5000 lb model) under it to see if it would fit. Technically, the lift would probably fit, but you would need to be careful to dodge the muffler and brake pushrods. Since the frame of the car is already so high, the lift isn’t going to do much lifting. I’ll stick with my jack stands.
Sent from my iPhone using Tapatalk |
11-02-2019, 01:09 PM | #36 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Quick Jack Car Lift
My Victoria frame is 17” off the ground. The lift comes with 8 rubber blocks to go between the lift and the car. You can pick the 4 short blocks, the 4 tall blocks, or stack the blocks on top each other. Using the tall blocks, the lift will only push the jack point 18.5”. If you stack the short blocks and tall blocks together, the lift will push the jack point 20.5”. So, for me, if I use the Victoria frame as the jack point, the Quick Jack only pushes the car up 3.5”. Here are some pictures. The first one shows the auto-locking mechanism.
I use the Quick Jack for all my modern cars, but I don’t think I’ll bother with it on the Victoria. Sent from my iPhone using Tapatalk |
11-02-2019, 01:11 PM | #37 | |
Senior Member
Join Date: Dec 2010
Location: Kritter Krick, Flaw-duh
Posts: 1,158
|
Re: Quick Jack Car Lift
Quote:
^THIS!^ When I was young and foolish (as opposed to old and foolish like now ), I jacked up one corner of 39 Ford and put a concrete block under it. The block cracked as soon as I let the car down enough to put weight on it. Yeah, a 39 is heavier than a Model A but still... Fortunately, no part of my body was under the car or the block. |
|
11-03-2019, 07:55 AM | #38 |
Member
Join Date: Sep 2013
Location: Centerville, Iowa
Posts: 91
|
Re: Quick Jack Car Lift
The build up of fumes and gases in a pit are well documented. The solution is to install a "propane drain". The name comes from the fact that propane is heavier than air and will fall to the lowest point. All you have to do is install a regular 3 inch drain in the pit floor, minus the trap. The pipe would run to the outside, just like any other drain with proper slope. You don't tie it into any other lines, just so it drains out over the hill some where. The fumes "drain" out just like water or any other liquid. Some municipalities require it for a regular garage or anywhere vehicles are stored.
This is also why most municipalities require the gas water heater to be installed at least 24 inches above the floor in an area where vehicles are parked, like a garage. |
11-06-2019, 08:14 PM | #39 |
Senior Member
Join Date: May 2010
Location: Gaithersburg, Maryland
Posts: 518
|
Re: Quick Jack Car Lift
Hi Y-Blockhead!
I have a QuickJack and it works great on my modern cars and a 65 Corvette. I bought it mainly to use on my 29 Model A Coupe and the 65 Vette. I love the QuickJack, but could not make it work on the Model A. The Quickjack needs parallel frame rails in order for it to work. At the front of the Model A that I have the frame rails move closer to each other. The muffler also interferes with the placement of the QuickJack. I don't have the height in my garage for a regular lift, so I thought this would be a good choice. Happy with the purchase, but it doesn't work on my Model A. Thanks - Hunter |
11-07-2019, 10:37 AM | #40 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,950
|
Re: Quick Jack Car Lift
https://www.fordbarn.com/forum/showthread.php?t=256084
I use mine on my '41 coupe, my ceiling is low so I can only lift it to the first notch, left it this way all last winter, no problems at all. I don't know anyone with a model 'A' so I'm not sure what combination of rubber blocks or adapters you would need. |
11-07-2019, 11:47 AM | #41 |
Senior Member
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 985
|
Re: Quick Jack Car Lift
After reading all the above comments I think I will save my $$ and continue using my trusty jackstands.
__________________
Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria |
|
|
Sponsored Links (Register now to hide all advertisements) |
|