Rear axel warran keyseat

[steamgas]

i have a warran rear axel keyseat and the keyseat in the drum is warren also.what would be a good way too repair it without removing the axel?what about the same problem with the drum?

[Kurt in NJ]

If the drum/hub runs true on the axle, and the axle is not cracked (look close at the keway) make a custom fit key to match the worn keways.

[CWPASADENA]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Kurt in NJ

If the drum/hub runs true on the axle, and the axle is not cracked (look close at the keway) make a custom fit key to match the worn keways.

Good idea,

Be sure to torque the axle nuts up good and tight, 125 Ft.Lbs. After you have driven your car for a hundred miles or so, re-torque the axle nuts. This will keep the hub from moving on the axle and wearing the new key and key ways any more.

Good luck,

Chris