|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-27-2013, 09:59 AM | #1 |
Senior Member
Join Date: May 2010
Location: Jackson N.J
Posts: 206
|
57 -up y block distributor
I have searched high and low for a 57 up distributor.I see they have MSD and such but 300 and up is to much. Why wouldnt a fe dizzy work if i change the gear?
|
11-27-2013, 10:14 AM | #2 |
Senior Member
Join Date: May 2010
Location: St. Michael, Minnesota
Posts: 1,713
|
Re: 57 -up y block distributor
I have read on this forum that you can buy a rebuilt distributor for a 57 to 64 292 at NAPA for about 60 bucks. I also read that it comes with a pretty good curve built in. Screw it in and go.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-27-2013, 10:26 AM | #3 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
A remanufactured '57 up distributor is getting hard if not impossible to find. Cardone has quit reman them due to lack of cores. Autozone, O'Reilly's etc. all are Out of stock and on back order.
Some offer a rebuild service but you have to supply the core. Best bet is to go to a Bone Yard and get a good candidate to rebuild. I just saw a Reman go on ePay for $300 so the gougers are already on to it. edit; And no a FE will not work. |
11-27-2013, 10:32 AM | #4 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
Another thought, you could write to Pertronix and ask them to start making their "Stock Look" distributors for our cars since the stock remans are no longer available. Maybe if they gey enough requests they'll make them.
Last edited by Y-Blockhead; 11-27-2013 at 10:44 AM. |
11-27-2013, 05:37 PM | #5 |
Senior Member
Join Date: May 2010
Location: Granite City, Illinois
Posts: 3,008
|
Re: 57 -up y block distributor
I've got one out of a '57 Y-block in a cardboard box in the garage. Been there for about 30 years. But they say that the '59-up dizzy has a better advance mechanism than the 57/58, so if that is the reason you are looking for one, you might be better off looking for a '59-up for a y-block.
|
11-27-2013, 06:56 PM | #6 |
Senior Member
Join Date: May 2010
Location: Ellsworth Michigan
Posts: 1,807
|
Re: 57 -up y block distributor
Sponsored Links (Register now to hide all advertisements)
Last edited by raceron1120; 11-28-2013 at 07:12 AM. |
11-27-2013, 08:47 PM | #7 |
Member
Join Date: Jul 2011
Posts: 74
|
Re: 57 -up y block distributor
I have one for 1957 remanufactured
I had in in my 312 for two months If interested send me an Email to [email protected] I will get you pictures you can have it for 100.00 plus freight |
11-27-2013, 09:04 PM | #8 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
Quote:
Ron, more like supply and demand. If you can't get something the price goes up... Last edited by Y-Blockhead; 11-27-2013 at 09:13 PM. |
|
11-27-2013, 09:08 PM | #9 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: 57 -up y block distributor
If you can dig up a used one, Bubba's can rebuild it. Not too expensive either.
Anything from 57 to 62 will work. |
11-27-2013, 09:13 PM | #10 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
|
11-27-2013, 10:18 PM | #11 |
Senior Member
Join Date: Feb 2011
Location: SW WA state.
Posts: 564
|
Re: 57 -up y block distributor
63 and 64 Y blocks were in trucks only.
I ordered one from Advance last year for less than $50 with no core charge and free shipping after finding some coupon codes.
__________________
1956 Ford Fairlane Town Sedan 292 V8 with Ford-o-Matic |
11-27-2013, 10:55 PM | #12 |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
|
11-27-2013, 11:18 PM | #13 |
Senior Member
Join Date: Feb 2011
Location: SW WA state.
Posts: 564
|
Re: 57 -up y block distributor
__________________
1956 Ford Fairlane Town Sedan 292 V8 with Ford-o-Matic |
11-28-2013, 12:19 AM | #14 | |
Senior Member
Join Date: Jul 2011
Location: Redondo Beach, CA
Posts: 5,849
|
Re: 57 -up y block distributor
Quote:
They also list a New Richporter Distributor. Does anyone know anything about these? |
|
11-28-2013, 03:06 AM | #15 | |
Senior Member
Join Date: May 2010
Location: Phoenix,AZ
Posts: 1,417
|
Re: 57 -up y block distributor
Quote:
|
|
11-28-2013, 10:46 AM | #16 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: 57 -up y block distributor
Send me the old and the new and we can mate the lower drive off the old unit to the new full advance unit....
|
11-29-2013, 01:36 PM | #17 |
Junior Member
Join Date: Jul 2012
Posts: 5
|
Re: 57 -up y block distributor
I just did a search this morning and found about 8 cardone 30-2808 for less than $100.00 buy it now and some for a little more with free shipping. There was some last week for about the same price. they sold out in one day. This was on E-bay.
|
11-29-2013, 04:30 PM | #18 |
Senior Member
Join Date: Aug 2012
Posts: 886
|
Re: 57 -up y block distributor
I saw those also. I find it strange that they don't list that they're for a Y-Block or 292 or something in the title so people doing a search can find them easier.
__________________
The Master Cylinder Enjoying life at the beach in SoCal... |
11-29-2013, 06:37 PM | #19 |
Senior Member
Join Date: Dec 2010
Location: p.e.i.
Posts: 1,060
|
Re: 57 -up y block distributor
I was just on y-blocksforever and a 57 dist,was ordered yesterday from advance auto so they still have them.
|
11-29-2013, 08:31 PM | #20 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,982
|
Re: 57 -up y block distributor
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|