06-14-2020, 07:05 PM | #1 |
Senior Member
Join Date: Sep 2019
Location: Kountze,TX
Posts: 313
|
Crank Hole
My crank hole in the radiator shell and the guide doesn't line up with the front pulley. Not sure where to start trying to make everything line up. Antone run across this problem?
|
06-14-2020, 07:19 PM | #2 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: Crank Hole
A common issue. I would start with trying to adjust the front motor mount by tightening the nut to bring it down or loosening it to bring it up. Thats if you have a stock mount with correct parts.
__________________
"The more things change, the more they stay the same." |
Sponsored Links (Register now to hide all advertisements) |
|
06-14-2020, 07:46 PM | #3 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,046
|
Re: Crank Hole
Also check the rear motor mounts.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
06-15-2020, 07:31 AM | #4 |
Senior Member
Join Date: Nov 2018
Location: Dahlonega, Ga
Posts: 251
|
Re: Crank Hole
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|