|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-01-2020, 10:16 PM | #1 |
Senior Member
Join Date: Sep 2013
Location: Canyon Country, Ca
Posts: 146
|
S/W Windshield Frame Installation
Hi All,
When installing the windshield frame is there a different gasket for a S/W that goes between the wood header and frame hinge? I ordered a frame & hinge gasket for a S/W but it just doesn’t seem like that also would go between the hinge and wood header. Thank you, Denny |
11-02-2020, 12:26 AM | #2 |
Senior Member
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
|
Re: S/W Windshield Frame Installation
Do you have the correct gasket?
The gasket for the 1931 S/W is a different gasket. See the below link to the correct gasket sold by Bratton's, and the installation instructions. https://www.brattons.com/slant-winds...ge-gasket.html https://www.brattons.com/files/index...id/1497381523/
__________________
1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? |
Sponsored Links (Register now to hide all advertisements) |
|
11-02-2020, 07:02 AM | #3 |
Senior Member
Join Date: Dec 2014
Location: Hillsboro IL
Posts: 478
|
Re: S/W Windshield Frame Installation
This drawing helped me. Art
|
11-02-2020, 08:04 AM | #4 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,360
|
Re: S/W Windshield Frame Installation
It’s been awhile since Ive installed one
I do remember that the gasket was NOT a perfect fit; a bit too big |
11-02-2020, 09:56 AM | #5 |
Senior Member
Join Date: Sep 2013
Location: Canyon Country, Ca
Posts: 146
|
Re: S/W Windshield Frame Installation
@160B the link from Brattons is exactly what I have. I just wanted to make sure that was all I needed. It didn’t look like it was correct for the hinge.
@ Art thank you for the drawing. Denny |
11-02-2020, 08:54 PM | #6 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,372
|
Re: S/W Windshield Frame Installation
Sponsored Links (Register now to hide all advertisements)
|
11-03-2020, 08:40 AM | #7 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
|
Re: S/W Windshield Frame Installation
The gasket naturally tends to hold water as shown by the blue arrows, so use plenty of sealant between the gasket and the header, and between the gasket and the windshield frame.
__________________
Bob Bidonde |
11-03-2020, 10:23 AM | #8 | |
Senior Member
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
|
Re: S/W Windshield Frame Installation
Quote:
https://www.sashco.com/products/big-stretch/
__________________
1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? Last edited by 160B; 11-04-2020 at 11:38 AM. |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|