Bob Drake Gas Tank

[Kube]

Originally Posted by 40fordpu

better picture

The repop bed rails are nice but far from accurate when compared closely to the original. I might suggest you modify the rail to suit.

[40fordpu]

Great thanks everyone. started another thread on the bed build with question of course. If you guys have time check it out and comment.

[Kube]

Here's a photo depicting the tank inlet on my restoration.

[G.M.]

Originally Posted by Charlie ny

Be sure you check the romoveability of your tank before installing the bed. The neck on my Drake tank was mislocated as mentioned here and was slightly miscontoured which
unfortunately will not allow it to be removed from the from the frame in the normal way.
I installed the tank prior to installing the bed.
Charlie ny

Even on the original tanks you have to Force the tank to the left so
the tank flange clears the right side bottom frame rail. G.M.