02-16-2017, 08:33 PM | #1 |
Senior Member
Join Date: Aug 2010
Posts: 108
|
crack
I have an 8Ba I just took apart and I found a crack that runs from the edge of the ex valve to the cylinder wall it is about 3/4 of an inch down the wall. This block has an over bore of .125 and I have a mercury crank . In the past I would junk the block . There are some things I won't do at this time .
Never junk a flathead never junk a pick up Never give up on a Christan |
|
|
Sponsored Links (Register now to hide all advertisements) |
|