|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-02-2024, 06:07 PM | #1 |
Senior Member
|
33/34 Pick up Hinges
Pick up hinges ,Had a difficult time pressing these hinges out about 5 hrs so tried the fast way,by cutting deep .
|
02-02-2024, 07:12 PM | #2 |
Senior Member
Join Date: May 2015
Posts: 8,162
|
Re: 33/34 Pick up Hinges
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2024, 08:04 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 2,488
|
Re: 33/34 Pick up Hinges
The knurled section is only about 1/4" long, and if drilled they frequently come out. Now days the new knurled section is often turned down in diameter. Offset wear of pin will make the job more difficult. Later vehicles use an oil notch on body hinge, and spiral groves on pins. Newc
|
02-04-2024, 02:57 PM | #4 |
Senior Member
|
Re: 33/34 Pick up Hinges
Thanks for the heads up News.I fabricated a puller a bit like the one here which has worked on light pushes, you use a drill shank because its hardened .When i restored my 35 in the 80s I fitted mirrors from Carpenters and first saw the knurled pins then ,the push rod is only 3/8
Last edited by FlatheadTed; 02-04-2024 at 08:36 PM. |
02-04-2024, 03:15 PM | #5 |
Senior Member
Join Date: May 2015
Posts: 8,162
|
Re: 33/34 Pick up Hinges
Sponsored Links (Register now to hide all advertisements)
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|