|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-27-2021, 06:57 PM | #1 |
Senior Member
Join Date: Oct 2012
Location: San Francisco Bay Area
Posts: 427
|
Electric Wiper switch to replace 1941 Pickup original switch
Is anyone selling an electric wiper switch that looks like and can fit in the same hole as the original switch on a 1941 Ford 1/2 ton Pickup? Does the 1953 - 56 F100 wiper switch fit?
I know many of you have replaced your vacuum wipers with electric, so I am thinking this has to be something someone has done. If you came up with your own home baked solution, what switch did you use and what about the knob? I'd like a stock look if possible. Thanks, |
03-27-2021, 07:08 PM | #2 |
Senior Member
Join Date: May 2010
Location: Midland Park, NJ
Posts: 3,980
|
Re: Electric Wiper switch to replace 1941 Pickup original switch
By any chance do you have a New Port Engineering kit? They have an adapter to use the stock knob.
__________________
48 Ford Conv 56 Tbird 54 Ford Victoria |
Sponsored Links (Register now to hide all advertisements) |
|
03-27-2021, 07:59 PM | #3 |
Senior Member
Join Date: Oct 2012
Location: San Francisco Bay Area
Posts: 427
|
Re: Electric Wiper switch to replace 1941 Pickup original switch
Nope, mine is a simple single washer, single speed universal motor.
|
03-28-2021, 01:35 PM | #4 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,257
|
Re: Electric Wiper switch to replace 1941 Pickup original switch
In my 40 convertible I used a small pull on/push off switch that fit into the original hole . Made a bezel from the original switch mechanism and put an original type knob on the shaft.
It’s only a single speed motor. |
03-28-2021, 07:45 PM | #5 |
Senior Member
Join Date: Apr 2017
Location: Texas Gulf Coast
Posts: 727
|
Re: Electric Wiper switch to replace 1941 Pickup original switch
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|