The Ford Barn

vic · 12-09-2010, 03:16 AM

My 1930 Town sedan has the usual pull up interior door handles....trouble is, majority of passengers insist on pulling them sideways,and as its only muck metal,the square shanks are all rounded off.Can anyone suggest a fix to firm them up again?
Once again,many many thanks for your input.
vic in hot humid Auckland.

redmodelt · 12-09-2010, 12:01 PM

You might try something like JB Weld and a place card that reads "To exit, when the car comes to complete stop lift the exit lever and gently push open the escape hatch, DO NOT TWIST exit lever!

Steve Plucker · 12-09-2010, 12:09 PM

Sponsored Links (Register now to hide all advertisements)

Buy repros and save the good "original" ones for that special day like judging !!!

Pluck

12-09-2010, 03:16 AM	#1
vic Member Join Date: Oct 2010 Location: auckland;new zealand Posts: 53	interior door handles My 1930 Town sedan has the usual pull up interior door handles....trouble is, majority of passengers insist on pulling them sideways,and as its only muck metal,the square shanks are all rounded off.Can anyone suggest a fix to firm them up again? Once again,many many thanks for your input. vic in hot humid Auckland.

12-09-2010, 12:01 PM	#2
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: interior door handles You might try something like JB Weld and a place card that reads "To exit, when the car comes to complete stop lift the exit lever and gently push open the escape hatch, DO NOT TWIST exit lever!

12-09-2010, 12:09 PM	#3
Steve Plucker BANNED Join Date: May 2010 Location: Walla Walla, Washington USA Posts: 6,066	Re: interior door handles Sponsored Links (Register now to hide all advertisements) Buy repros and save the good "original" ones for that special day like judging !!! Pluck