The Ford Barn

LHolderman · 01-04-2021, 03:06 PM

Does anyone make rear fender in "Steel" for a 1929 Murray?? The ones that I have will take lots....of work.

1930artdeco · 01-05-2021, 02:29 AM

Sedan rear fenders are the same for both Briggs and Murray. Depends on what a lot of work means. Might check with your local club, people always have things squirreled away.

Mike

LHolderman · 01-05-2021, 11:43 AM

Thanks Mike, I thought the rears were different because of the Briggs/Murray body

BRENT in 10-uh-C · 01-05-2021, 01:03 PM

Quote:

Originally Posted by LHolderman

Thanks Mike, I thought the rears were different because of the Briggs/Murray body

Nope, -and they are presently not being reproduced.

LHolderman · 01-06-2021, 08:04 AM

Mike: I want to make sure I understand this correctly. The 1928-29 Standard, Murray and Briggs body cars all take the same rear fenders?? Brent states that they are not being reproduced at this time(steel). I have restored several Model T's in the past. This would be my first frame off restoration of a Model A. I have a Model A Speedster(repro) and a 31 Tudor that mainly needed mechanical things done. I have a lot to learn on Model A differences Larry

Chuck Kuntz · 01-06-2021, 08:19 AM

Sponsored Links (Register now to hide all advertisements)

I have a pair of very nice original rear fenders for $375.
Chuck

LHolderman · 01-06-2021, 05:23 PM

Chuck: I tried to contact you using the private message. Since I am new to the forum it won't let me. Send me a email to, [email protected] I would like photos of them and where you are located. Thanks Larry

Chuck Kuntz · 01-08-2021, 07:58 AM

I am in Altoona PA. I WILL SEND PHOTOS this morning,
Chuck

01-04-2021, 03:06 PM	#1
LHolderman Junior Member Join Date: Jan 2021 Location: Warsaw, IN Posts: 27	1929 Murray Rear Fenders Does anyone make rear fender in "Steel" for a 1929 Murray?? The ones that I have will take lots....of work.

01-05-2021, 02:29 AM	#2
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,552	Re: 1929 Murray Rear Fenders Sedan rear fenders are the same for both Briggs and Murray. Depends on what a lot of work means. Might check with your local club, people always have things squirreled away. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

01-05-2021, 11:43 AM	#3
LHolderman Junior Member Join Date: Jan 2021 Location: Warsaw, IN Posts: 27	Re: 1929 Murray Rear Fenders Thanks Mike, I thought the rears were different because of the Briggs/Murray body

01-06-2021, 08:04 AM	#5
LHolderman Junior Member Join Date: Jan 2021 Location: Warsaw, IN Posts: 27	Re: 1929 Murray Rear Fenders Mike: I want to make sure I understand this correctly. The 1928-29 Standard, Murray and Briggs body cars all take the same rear fenders?? Brent states that they are not being reproduced at this time(steel). I have restored several Model T's in the past. This would be my first frame off restoration of a Model A. I have a Model A Speedster(repro) and a 31 Tudor that mainly needed mechanical things done. I have a lot to learn on Model A differences Larry

01-06-2021, 08:19 AM	#6
Chuck Kuntz Senior Member Join Date: May 2010 Posts: 13,690	Re: 1929 Murray Rear Fenders Sponsored Links (Register now to hide all advertisements) I have a pair of very nice original rear fenders for $375. Chuck

01-06-2021, 05:23 PM	#7
LHolderman Junior Member Join Date: Jan 2021 Location: Warsaw, IN Posts: 27	Re: 1929 Murray Rear Fenders Chuck: I tried to contact you using the private message. Since I am new to the forum it won't let me. Send me a email to, [email protected] I would like photos of them and where you are located. Thanks Larry

01-08-2021, 07:58 AM	#8
Chuck Kuntz Senior Member Join Date: May 2010 Posts: 13,690	Re: 1929 Murray Rear Fenders I am in Altoona PA. I WILL SEND PHOTOS this morning, Chuck