|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-10-2020, 06:54 AM | #1 |
Senior Member
Join Date: Dec 2012
Location: CT
Posts: 394
|
41 ford choke & Throttle Rod rubber connections
What is the best way to attach the new rubber
Connections to the existing rods. The originals Are crimped on. I've cut those off and am thinking about using epoxy Thoughts? |
10-10-2020, 07:48 AM | #2 |
Senior Member
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 541
|
Re: 41 ford choke & Throttle Rod rubber connections
I have a buddy that used JB on them. Looks stock and works well.
I used a hydraulic cable crimper for some yacht wire balustrading I did a while back. Worked well but left hex crimp marks on the joints if thats a worry for you. |
Sponsored Links (Register now to hide all advertisements) |
|
10-10-2020, 08:53 AM | #3 |
Senior Member
Join Date: Dec 2012
Location: CT
Posts: 394
|
Re: 41 ford choke & Throttle Rod rubber connections
Thks unfortunately I don't have one. Of those the side that connects 1to the carburator arm I did in a vise 1 and it should be fine it's the side on the cable side I'm debating best approach
|
10-11-2020, 04:23 AM | #4 |
Senior Member
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 541
|
Re: 41 ford choke & Throttle Rod rubber connections
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|