|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-26-2023, 06:43 PM | #61 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Floor is all done. Doors back on with Altman bear claw latches. New rear wheels from wheel smith arrived as well. Tires can now be mounted.
__________________
Respecting and Resurrecting Ford Model A's. |
08-26-2023, 06:51 PM | #62 | |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
Sponsored Links (Register now to hide all advertisements) |
|
08-29-2023, 07:26 PM | #63 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Starting on building the exhaust. Wheels and tires are on.
__________________
Respecting and Resurrecting Ford Model A's. |
08-29-2023, 08:47 PM | #64 |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
08-30-2023, 04:57 PM | #65 |
Member
Join Date: Jul 2023
Location: Wisconsin
Posts: 65
|
Re: New project: ‘41 ford pickup
Vanspeed: I've been following your rebuild with interest. I have a '41 PU as well, although it is pretty much a done vehicle.
Have you gotten into the carburetor yet? I'm in need of the choke & throttle rods. Whether they are available, or if I have to make them myself, I can do that if necessary. If I make them, I might need the various component part dimensions. If you get to that point let me know. I can take photos to send to you for your reference. Mike |
08-30-2023, 08:55 PM | #66 | |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
Respecting and Resurrecting Ford Model A's. |
|
08-31-2023, 10:29 AM | #67 |
Member
Join Date: Jul 2023
Location: Wisconsin
Posts: 65
|
Re: New project: ‘41 ford pickup
Thanks anyway. If one doesn't ask, one will never know.
Mike |
09-23-2023, 07:01 PM | #68 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Little more progress on the ‘41. I know the drivetrain is not ford but this is a customers vehicle and this is his dream car. It should move about pretty well. Cab and bed back on for final time.
__________________
Respecting and Resurrecting Ford Model A's. |
09-23-2023, 07:03 PM | #69 | |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
09-23-2023, 08:45 PM | #70 |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,945
|
Re: New project: ‘41 ford pickup
He wants it for his daily driver to go wherever, whenever? Could you work up a couple of hardened steel pins that lock the rear hubs to the axle housing from say 11/1 until 3/31 or thereabouts? You could manage them from a remote device.....
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
09-27-2023, 08:17 PM | #71 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Scored some ‘40 - ‘41 rear sedan delivery fenders, at least that is what the seller said they were. Perfect candidates to split up the fenders so I could keep the good and l replace the bad. Passenger side up next!
__________________
Respecting and Resurrecting Ford Model A's. |
09-27-2023, 08:28 PM | #72 | |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
09-27-2023, 09:24 PM | #73 |
Senior Member
Join Date: May 2010
Location: PRINEVILLE, OR.
Posts: 490
|
Re: New project: ‘41 ford pickup
My '41 Pickup
__________________
KIM KARDASHIAN ISN'T FLAT, BUT MY MOTOR IS..... http://s818.photobucket.com/home/roglehr/index |
10-26-2023, 05:52 PM | #74 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Bed wood and strips in for final time. Rear fenders on for final time.
__________________
Respecting and Resurrecting Ford Model A's. |
10-26-2023, 06:16 PM | #75 |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
10-26-2023, 06:18 PM | #76 | |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
10-27-2023, 02:49 PM | #77 |
Senior Member
Join Date: May 2010
Location: Williamsburg, Virginia
Posts: 2,654
|
Re: New project: ‘41 ford pickup
Boy - you have really come a long way! I love your build!
|
12-19-2023, 05:14 PM | #78 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
Sheetmetal is all installed. Building a custom shroud for the radiator. Next is wiring. Getting close.
__________________
Respecting and Resurrecting Ford Model A's. |
12-19-2023, 06:52 PM | #79 | |
Senior Member
Join Date: May 2015
Posts: 8,166
|
Re: New project: ‘41 ford pickup
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
12-23-2023, 11:25 PM | #80 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,386
|
Re: New project: ‘41 ford pickup
All work is done except for wiring. Thanks to those that followed. I know this was not a stock ford restoration but I thought some might like it. Thanks for following.
__________________
Respecting and Resurrecting Ford Model A's. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|