The Ford Barn

Randy1944 · 04-26-2018, 05:58 PM

What length push rod should go on a Ford 8BA engine with an aluminum intake manifold? Thanks

51 MERC-CT · 04-26-2018, 06:22 PM

My aluminum Offy manifold takes the same 10-1/16" long push rod as the stock cast iron manifold.

Randy1944 · 04-26-2018, 06:30 PM

Thanks 51 Merc-ct, For some reason, I thought the alum.intake took a different size. Thanks

FortyNiner · 04-26-2018, 08:52 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Randy1944

Thanks 51 Merc-ct, For some reason, I thought the alum.intake took a different size. Thanks

You are correct for the 59AB version.

04-26-2018, 05:58 PM	#1
Randy1944 Senior Member Join Date: Jun 2010 Location: east Tennessee Posts: 363	Fuel pump push rod What length push rod should go on a Ford 8BA engine with an aluminum intake manifold? Thanks

04-26-2018, 06:22 PM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: Fuel pump push rod My aluminum Offy manifold takes the same 10-1/16" long push rod as the stock cast iron manifold. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES

04-26-2018, 06:30 PM	#3
Randy1944 Senior Member Join Date: Jun 2010 Location: east Tennessee Posts: 363	Re: Fuel pump push rod Thanks 51 Merc-ct, For some reason, I thought the alum.intake took a different size. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode