|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-21-2024, 02:53 PM | #1 |
Senior Member
Join Date: Aug 2011
Location: OH
Posts: 442
|
Need Id on rear window garnish
Need some help on years make (Ford or Mercury probably ?) and models for this rear window garnish it measures 14 5/8 " tall and 33 1/4" wide The center piece is fixed and not removeable like some. Thanks in advance
|
02-21-2024, 03:25 PM | #2 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,001
|
Re: Need Id on rear window garnish
Looks like one for a 1939 Mercury Coupe, I can verify in about 2 hours or so when I get home from work!!!
|
Sponsored Links (Register now to hide all advertisements) |
|
02-21-2024, 03:35 PM | #3 | |
Senior Member
Join Date: May 2015
Posts: 8,372
|
Re: Need Id on rear window garnish
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
02-21-2024, 06:42 PM | #4 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,001
|
Re: Need Id on rear window garnish
Bistingear
I can’t upload the photos off my phone as the image is too big and will post in the morning from my work computer, until then the measurements are as follows, the widist point is 37”, the width at the center divider is 13-7/16” and the widist part of each glass opening is about 16-3/4ish 16-7/8ish wide!!! Again will post pictures first thing in the morning!!! looks just like mine!!! 1939 Mercury Sedan Coupe IF the measurements match!!! |
02-21-2024, 08:06 PM | #5 |
Senior Member
Join Date: Aug 2011
Location: OH
Posts: 442
|
Re: Need Id on rear window garnish
ok this is only 33.25" wide
|
02-22-2024, 07:51 AM | #6 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,001
|
Re: Need Id on rear window garnish
Sponsored Links (Register now to hide all advertisements)
Just to make sure you and I are/were measuring from the same locations. Maybe 39 Ford since its narrower |
02-22-2024, 08:29 AM | #7 |
Senior Member
Join Date: Aug 2011
Location: OH
Posts: 442
|
Re: Need Id on rear window garnish
ok thanks 39 ford it is
|
02-22-2024, 08:37 AM | #8 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 4,001
|
Re: Need Id on rear window garnish
|
02-22-2024, 10:27 AM | #9 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,409
|
Re: Need Id on rear window garnish
The one that fits my 1937 coupe is 13.25” tall by 36.25” wide, same as rockfla’s dimensions.
|
02-22-2024, 11:54 AM | #10 |
Senior Member
Join Date: May 2015
Posts: 8,372
|
Re: Need Id on rear window garnish
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|