|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-07-2020, 04:33 PM | #1 |
Junior Member
Join Date: Aug 2019
Location: Arvada
Posts: 25
|
Starter Bendix bolt broken
My starter wouldn't engage so I pulled it and found the outer bolt that holds the spring apparently broke off and the bolt and washer must be at the bottom of the flywheel housing.
Replacing the bolt and locking washer is easy enough but how do you retrieve the broken bolt and washer? Or is it necessary to get them out? I'm afraid they might rattle around and damage starter gear on the flywheel. |
09-07-2020, 04:43 PM | #2 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Starter Bendix bolt broken
You will get a number of explanations on how to retrieve the bolt and if you really feel you must get it out, go for it but I'd leave it where it is. It will not be the only bolt that resides in the housing for years.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
Sponsored Links (Register now to hide all advertisements) |
|
09-07-2020, 04:56 PM | #3 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Starter Bendix bolt broken
Drop the wishbone,remove the wishbone caps,probe with a flexible magnet
|
09-07-2020, 05:26 PM | #4 |
Senior Member
Join Date: May 2010
Location: California
Posts: 977
|
Re: Starter Bendix bolt broken
|
09-07-2020, 05:28 PM | #5 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: Starter Bendix bolt broken
I took a length of drain auger and epoxied an earth magnet from Harbor freight on one end.
You can put it down the starter hole while it is out, and you’ll get the pieces out with just a couple of passes |
09-07-2020, 05:32 PM | #6 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,354
|
Re: Starter Bendix bolt broken
Sponsored Links (Register now to hide all advertisements)
|
09-07-2020, 06:46 PM | #7 |
Senior Member
Join Date: Sep 2017
Location: Mint Hill, North Carolina
Posts: 386
|
Re: Starter Bendix bolt broken
[QUOTE=Replacing the bolt and locking washer is easy enough but how do you retrieve the broken bolt and washer? Or is it necessary to get them out? I'm afraid they might rattle around and damage starter gear on the flywheel.[/QUOTE]
Yes, get them out. Not a lot of clearance between the ring gear and housing and you'll want the peace of mind knowing you removed them |
09-07-2020, 08:46 PM | #8 |
Member
Join Date: Feb 2020
Location: Glendora, Calif..
Posts: 56
|
Re: Starter Bendix bolt broken
Take a length of garden hose and tape it to a shop vac hose and after the starter is out shove it down to the bottom of the flywheel housing and you should be able to suck the washer and bolt out.
|
09-07-2020, 08:59 PM | #9 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: Starter Bendix bolt broken
Many, many prior posts on this very subject !
|
09-07-2020, 10:23 PM | #10 |
Junior Member
Join Date: Aug 2019
Location: Arvada
Posts: 25
|
Re: Starter Bendix bolt broken
Thanks for all the good advice. Although it would probably be OK left in, I'll feel better if I get it out.
|
09-08-2020, 04:49 PM | #11 |
Senior Member
Join Date: May 2010
Location: Bozeman, Montana
Posts: 997
|
Re: Starter Bendix bolt broken
Bob Johnson's video (http://www.modelahouse.com/movies/bolt.wmv) has a brilliant solution.
|
09-08-2020, 07:45 PM | #12 |
Senior Member
Join Date: Jun 2013
Location: Western Springs, IL
Posts: 323
|
Re: Starter Bendix bolt broken
We had a broken bolt wedge itself onto the flywheel and we could not get a complete revolution of the motor... had to pull the motor to get the bolt out.
|
09-09-2020, 10:13 PM | #13 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,902
|
Re: Starter Bendix bolt broken
I carry a spare bolt and lock washer in my cars. I’ve been stuck a couple times as a result of failures on these parts. I’ve never tried to remove the broken parts. Almost 60 years and over 50,000 miles of driving A’s. But, do what makes you comfortable driving your A, and drive it!
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. |
09-09-2020, 11:59 PM | #14 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,336
|
Re: Starter Bendix bolt broken
Just curious, what are the issues with using a 'Modern' starter drive. I have never had a problem with them.
__________________
Ruth "Sometimes you really DO need to read the whole thread" |
09-10-2020, 09:39 AM | #15 |
Senior Member
Join Date: Jan 2016
Posts: 2,093
|
Re: Starter Bendix bolt broken
|
09-13-2020, 08:30 AM | #16 |
Junior Member
Join Date: Aug 2019
Location: Arvada
Posts: 25
|
Re: Starter Bendix bolt broken
To followup on getting the bolt and washer out of the flywheel housing I bought a tool with a flexible spring, internal, retractable grab hook with a magnet on the end. It was $11 at the local auto parts store. I didn't need the grab hook but might be handy down the road.
The bolt and washer came out in the 1st pass. It took all of about 3 minutes once I had the tool. I'm sure I could have fashioned something homemade as some suggested and would have worked just as well. As easy as this is to do, not sure why you wouldn't just go ahead and get it out. Apologize for not searching previous posts on this as this is a common issue and many previous posts with same solution. |
09-13-2020, 01:28 PM | #17 |
Senior Member
Join Date: Mar 2011
Location: New Brunswick, Canada
Posts: 1,013
|
Re: Starter Bendix bolt broken
Vacuum with a tube to fit down inside works great!
|
11-03-2020, 07:38 PM | #18 |
Senior Member
Join Date: May 2010
Location: Shrewsbury,Pa
Posts: 513
|
Re: Starter Bendix bolt broken
Two things to talk about: 1---try a rare earth magnet, one about the size of a quarter, put it on the ring gear, turn it around with the crank and the bolt should be attached to it when it comes around. 2--- I got some Bendix spring bolts a while back where the long bolt with the nub sticking out was too large to fit in the hole in the shaft. I had to set it up in a lathe and turn it down a bit. Only then did I put it in my spare parts in my touring box.
|
11-04-2020, 12:30 PM | #19 | |
Senior Member
Join Date: May 2010
Location: Bismarck ND
Posts: 1,189
|
Re: Starter Bendix bolt broken
Quote:
|
|
11-04-2020, 01:03 PM | #20 |
Senior Member
Join Date: Jun 2011
Posts: 890
|
Re: Starter Bendix bolt broken
HI;
Got to ask this what was the tool called that you bought at the part's store, as I would like to get one myself as I have had the same problem with my car. As most of the time I can catch it before it breaks off totally but I still would like to get one of those tools that you are talking about from the part's store, But I would also like to know as to what part's store did you buy it at and how much did it cost you to buy it. Thanks Reggiedog |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|