The Ford Barn

MVal · 08-07-2016, 05:22 PM

My 30-31 generator recently overheated (250+ deg) and the field pole insulation is scorched and mostly missing so am considering replacing both field poles and anything else to put it back into usable condition. But before I spend money on the field windings etc. and get involved in the project wanted to know if anyone has some experience in removing the screws holding the poles in place as they look pretty securely in place. Have considered using a rachet with a screwdriver attachment in a drill press but thought maybe someone had a better idea and more experience.

08-07-2016, 05:22 PM	#1
MVal Member Join Date: May 2010 Posts: 69	Replacing generator field windings My 30-31 generator recently overheated (250+ deg) and the field pole insulation is scorched and mostly missing so am considering replacing both field poles and anything else to put it back into usable condition. But before I spend money on the field windings etc. and get involved in the project wanted to know if anyone has some experience in removing the screws holding the poles in place as they look pretty securely in place. Have considered using a rachet with a screwdriver attachment in a drill press but thought maybe someone had a better idea and more experience.