|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-28-2021, 06:57 AM | #1 |
Senior Member
Join Date: May 2017
Location: Huntington Beach, Calif
Posts: 330
|
Help with Roadster top rests and window rest placement
Greetings. If anyone is inclined to help me out here, I need the exact dimensions for drilling the holes for my Top rests and rubber window rests for my deluxe roadster top. If possible some photos with tape measure reference. Probably easiest to email me directly if you send me a PM here I will provide contact info. Thanks in advance, Greg
Last edited by Nosetime; 04-29-2021 at 09:34 AM. |
04-28-2021, 12:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Help with Roadster top rests and window rest placement
They should have have been drilled originally, have you checked the bottom side? May not apply to reproduction bodies. Emailing directly is a bad idea. The others on fordbarn will not be ably to benefit from the information and if there is a mistake no one will see it and correct it before you start drilling.
Charlie Stephens |
Sponsored Links (Register now to hide all advertisements) |
|
04-28-2021, 07:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,884
|
Re: Help with Roadster top rests and window rest placement
May be a Brookville body?
|
04-29-2021, 05:39 AM | #4 |
Senior Member
Join Date: May 2017
Location: Huntington Beach, Calif
Posts: 330
|
Re: Help with Roadster top rests and window rest placement
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|