|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-25-2014, 07:15 PM | #1 |
Senior Member
Join Date: May 2010
Location: Suth'N Maine
Posts: 1,996
|
speedometer cable bracket...Location!
Well a little detective work and reading landed me the location. In my early post as stated, I had no bracket mounted, and today I found out why.
Got a flash light out and got looking @ the underside of the frame just below and past the MS bracket location and could see two wear marks 1st pic. Above the frame 2nd pic, could see the old bolt threads sticking up. The last picture shows the final result. Any one who did not have one or like mine was long ago worn off, here you go. Scott |
01-27-2014, 09:50 AM | #2 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: speedometer cable bracket...Location!
Thanks for sharing what you found out. Now I will have to get my cable properly mounted down.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-29-2014, 12:14 PM | #3 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,969
|
Re: speedometer cable bracket...Location!
Sponsored Links (Register now to hide all advertisements)
Here's the bracket with original screw on my 40. I encased cable in rubber hose. Last edited by 19Fordy; 01-29-2014 at 12:27 PM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|