What Y-Block camshafts work well with automatic transmissions?

[55blacktie]

Who manufactures a billet flat-tappet cam for anything other than diesels?

[JeffB2]

This may be a better option,a lot of guys on the H.A.M.B. use them for vintage engine camshafts instead of buying a "Cam in a box" camshaft if you give them the exact specs of your engine and it's intended use they can grind you a custom grind to fit your exact needs. https://deltacam.com/ They also can apply a hardening to better withstand today's engine oils.

[55blacktie]

oregoncamshaft.com also good. They can regrind your cam or provide new.They know Fords. Tim McMaster (y-blockguy) uses them. They also resurface y-block lifters.

[Pete]

If you decide to go with a steel billet, have Jones Cams do it.
[email protected]

Mike Jones designs and grinds cams for many of the top teams in just about any type of racing there is. He can do a steel billet, furnish the special lifters required and furnish the special distributor drive gear required. All at a reasonable price.

Tell him I sent you and he might only raise the price 10%....LOL

[Pete]

If you decide to go with a steel billet, have Jones Cams do it.
[email protected]

Mike Jones designs and grinds cams for many of the top teams in just about any type of racing there is. He can do a steel billet, furnish the special lifters required and furnish the special distributor drive gear required. All at a reasonable price.

Tell him I sent you and he might only raise the price 10%....LOL

[55blacktie]

Sponsored Links (Register now to hide all advertisements)

They have a billet cam for the Ford Y-block engine? What about Y-block lifters? Got to be a first.

[Pete]

I had them at one time. He should still have that stuff.