The Ford Barn

Banker · 09-24-2016, 09:05 AM

I purchased a 29 Model A pickup that had rear fenders that did not belong on the pickup. Someone told me they may belong to an AA. The fenders look like the Model A pickup fenders but the rear fender brace goes through a hole in the fender, they do no have the indention for the running board splash aprons and the fenders have a small splash guard attached.

The fenders are 23 1/2 inches high, 41 inches long and 9 3/4 inches wide.

1930artdeco · 09-24-2016, 09:50 AM

We will need pictures for an accurate ID.

Mike

Banker · 09-24-2016, 01:26 PM

Here are a couple of pictures.

1930artdeco · 09-24-2016, 02:48 PM

It is possible that they are truck fenders. Definitely not car fenders. I am sure other experts will chime in.

Mike

Brentwood Bob · 09-25-2016, 02:20 PM

Wide body, or postal truck?

flatford39 · 09-25-2016, 02:51 PM

Sponsored Links (Register now to hide all advertisements)

AA rear fenders did not have splash guards as far as I know. There should also be holes for the bolts that fasten it to an express box. I have two sets of them here and they do resemble mine except for the splash guards. I suspect someone added them for a trailer function.

Steve Wastler · 09-25-2016, 04:37 PM

Not wide bed or postal. Picture shows of splash apron notch of wide bed fender

Tom Wesenberg · 09-25-2016, 04:46 PM

Quote:

Originally Posted by Steve Wastler

Not wide bed or postal. Picture shows of splash apron notch of wide bed fender

Are you asking what it fits?

Need to see the mounting holes. Maybe it's for a Chevy truck.

Banker · 09-25-2016, 05:15 PM

They are for sale, but I would like to find out what they belong to in order to provide a fair value.

Steve Wastler · 09-25-2016, 05:22 PM

Quote:

Originally Posted by Tom Wesenberg

Are you asking what it fits?

Need to see the mounting holes. Maybe it's for a Chevy truck.

My pic is of a wide bed fender showing the notch. In response to Bobs post. The op's fenders are not wide bed fenders

09-24-2016, 09:05 AM	#1
Banker Junior Member Join Date: Dec 2010 Location: Missouri Posts: 4	Help identifying fenders I purchased a 29 Model A pickup that had rear fenders that did not belong on the pickup. Someone told me they may belong to an AA. The fenders look like the Model A pickup fenders but the rear fender brace goes through a hole in the fender, they do no have the indention for the running board splash aprons and the fenders have a small splash guard attached. The fenders are 23 1/2 inches high, 41 inches long and 9 3/4 inches wide.

09-24-2016, 09:50 AM	#2
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,551	Re: Help identifying fenders We will need pictures for an accurate ID. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

09-24-2016, 02:48 PM	#4
1930artdeco Senior Member Join Date: May 2010 Location: Lynden, Wa Posts: 3,551	Re: Help identifying fenders It is possible that they are truck fenders. Definitely not car fenders. I am sure other experts will chime in. Mike __________________ 1930 TownSedan (Briggs) 1957 Country Sedan

09-25-2016, 02:20 PM	#5
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,241	Re: Help identifying fenders Wide body, or postal truck?

09-25-2016, 02:51 PM	#6
flatford39 Senior Member Join Date: May 2010 Location: NE Illinois Posts: 499	Re: Help identifying fenders Sponsored Links (Register now to hide all advertisements) AA rear fenders did not have splash guards as far as I know. There should also be holes for the bolts that fasten it to an express box. I have two sets of them here and they do resemble mine except for the splash guards. I suspect someone added them for a trailer function.

09-25-2016, 05:15 PM	#9
Banker Junior Member Join Date: Dec 2010 Location: Missouri Posts: 4	Re: Help identifying fenders They are for sale, but I would like to find out what they belong to in order to provide a fair value.