|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-20-2016, 11:25 PM | #1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Original flag terminal on cutout...
Does anyone have a photo of the ORIGINAL flag terminal that is connected to the two yellow wires on the cutout?
Thanks. Pluck |
09-21-2016, 10:55 AM | #2 |
Senior Member
|
Re: Original flag terminal on cutout...
Steve is this what you need.......
__________________
Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe |
Sponsored Links (Register now to hide all advertisements) |
|
09-21-2016, 03:12 PM | #3 |
Senior Member
Join Date: Jun 2016
Location: freeport il
Posts: 316
|
Re: Original flag terminal on cutout...
June 28
|
09-21-2016, 04:08 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Original flag terminal on cutout...
Quote:
Mark and Steve,...I thought the 2 wires were on 1 connector..? Look at Marco's photos.. http://www.fordbarn.com/forum/showth...t=Marco+wiring |
|
09-21-2016, 04:31 PM | #5 |
Senior Member
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
|
Re: Original flag terminal on cutout...
This terminal is on a wiring harness I bought years ago at a swap meet. It has a Ford tag w/ number A11647. It does show the 2 wires going to one terminal. I belief it is original but really don't know for sure. Wires are old, somewhat discolored and stiff.
|
09-21-2016, 05:06 PM | #6 |
Senior Member
|
Re: Original flag terminal on cutout...
Sponsored Links (Register now to hide all advertisements)
I have also shown here the REPOP that is being done, Notice the wires are the same size...(NOT CORRECT)and the smaller flag...
__________________
Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe |
09-21-2016, 05:13 PM | #7 |
Senior Member
|
Re: Original flag terminal on cutout...
NOTE for reference
__________________
Mark Maron Ill., Region MARC & MAFCA MARC JSC Member MAFFI Trustee National Facebook Admin. https://www.facebook.com/groups/MARC.group/ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe |
09-21-2016, 10:48 PM | #8 | |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Original flag terminal on cutout...
Quote:
That is what I wanted to see...I am not sure however if the size of the flag terminal changed when the wires were changed from 12 Gauge (yellow with black tracer) to 16 Gauge (yellow wire) in January 1928 or there abouts. So if someone has a known original flag terminal with the double yellow wire attached, can you please post a photo? Thanks. Pluck |
|
09-21-2016, 11:02 PM | #9 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Original flag terminal on cutout...
John and Iverson,
John, I do not see a Ford part number for A11647. Those terminals could very well be originals...I do not know! Just what are the widths of the terminls themselves??? Thanks. Pluck Last edited by Steve Plucker; 09-22-2016 at 08:05 AM. |
09-22-2016, 08:31 AM | #10 |
Senior Member
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
|
Re: Original flag terminal on cutout...
Terminal measures .380" in width. The part number is listed in the green bible as wiring harness for a Model A.
|
09-22-2016, 10:53 AM | #11 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Original flag terminal on cutout...
I have 4 of these, marked on the tag,..."NOS "A" Gen to Term Box".
I don't think they are for A's, there is no wire going to the starter. The colors are correct and so is the size, .380". Could be V/8,...also the wire ends for the terminal box are wrong.. |
09-22-2016, 02:57 PM | #12 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Original flag terminal on cutout...
That doesn't seem right for a generator, as even the later generators usually had only two wires. I guess if the generator ran a separate ground it could be correct.
|
09-23-2016, 12:16 AM | #13 |
Senior Member
Join Date: May 2010
Posts: 132
|
Re: Original flag terminal on cutout...
Dudley -
Your wire harnesses appear to be NOS Terminal Box to Instrument panel wiring. And yes many of the original wiring has an orange colored wire to the coil instead of red! |
09-23-2016, 10:01 AM | #14 | |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Original flag terminal on cutout...
Quote:
Thank you.. |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|