|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-19-2014, 08:12 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: Port St Lucie Florida
Posts: 398
|
Hard starting problem solved:)
It came on slowly-after checking things and scratching my head sore, I picked up a wrench and found most of the intake manifold bolts could easily be tightened 1/8 to 1/4 of a turn. Starts quick and runs great now. Next time that will be the 1st thing I check!!!
|
01-19-2014, 08:23 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Hard starting problem solved:)
Well gosh, Ken, we didn't know you had a problem... If you'da aked us, we'd a told you to tighten up those manifold bolts!
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
01-19-2014, 09:57 PM | #3 |
Senior Member
Join Date: Dec 2013
Location: Wellsford - NZ 0900
Posts: 214
|
Re: Hard starting problem solved:)
Seems that Ford have very cunningly built that problem into ALL their cars! My wife's daily driver, a 1999 Aussie Ford Fairmont 6-cyl suffered from the same thing just before christmas. Since I fitted a new gasket, and tightened the manifold back up, it has run better than it ever has in the 5 yrs we've owned it. Possibly better even than when it left the factory floor. Believe it ... or not!
|
01-20-2014, 11:24 PM | #4 |
Junior Member
Join Date: Nov 2010
Posts: 6
|
Re: Hard starting problem solved:)
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|