|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-02-2011, 06:18 PM | #1 |
Senior Member
Join Date: Sep 2010
Posts: 1,696
|
Help with top iron Identification
Hello fordbarn,
I am going to try and add some photos of some model a top bows. If you guys might be able to id them I would really appreciate it. And also if they look complete or what they might be missing? and if they are roadster or roadster pu top bows and possibly what year they fit? thank you =) |
04-02-2011, 06:22 PM | #2 |
Senior Member
Join Date: May 2010
Location: Daytona Beach, Fl & Spencer, W. Va,
Posts: 4,442
|
Re: Help with top iron Identification
poweredbylincoln ................
Those look like my '29 roadster irons. 1928 was the same. MIKE |
Sponsored Links (Register now to hide all advertisements) |
|
04-02-2011, 07:23 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,030
|
Re: Help with top iron Identification
The roadster pickup top bows did not fold (except for the new ones being made by LeBaron Bonney).
Charlie Stephens |
04-02-2011, 07:25 PM | #4 |
Senior Member
Join Date: May 2010
Location: Toronto, Ontario, Canada
Posts: 1,289
|
Re: Help with top iron Identification
Yes, they look like 28/29 Roadster bows as Mike stated. They look the same as mine.
|
04-02-2011, 08:10 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: Help with top iron Identification
If the fore/aft measurement of the front bow socket is 22" then it's 1928 through early 1929. If it measures 23" then it's mid-late 1929. The measurement is taken from the center of the hinge, straight forward as if it were mounted on the car.
__________________
http://www.abarnyard.com/ |
04-02-2011, 11:52 PM | #6 |
Senior Member
Join Date: Sep 2010
Posts: 1,696
|
Re: Help with top iron Identification
Sponsored Links (Register now to hide all advertisements)
So I take them as being 28/29 top bows, depending on the measurements given by marco and that they are roadster car, NOT rpu? Do they look complete to you fellows? and do you know if they possibly would work on a 30/31? Thank you guys again |
04-03-2011, 09:27 AM | #7 | |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: Help with top iron Identification
Quote:
__________________
http://www.abarnyard.com/ |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|