|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-04-2021, 05:55 PM | #1 |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,528
|
Ford 1 BA block
I'm interested in locating a good 1BA block with the valve seats on the block casting no removable valve seats any pitted seat surface would be OK.
Considering the block for another record breaking build. Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH |
09-08-2021, 09:14 PM | #2 |
Senior Member
Join Date: May 2014
Location: Lafayette, La.
Posts: 100
|
Re: Ford 1 BA block
what is the difference between an 8BA and 1BA? is it the 1BA has no removable hardened valve seats?
|
Sponsored Links (Register now to hide all advertisements) |
|
09-08-2021, 11:27 PM | #3 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: Ford 1 BA block
Sponsored Links (Register now to hide all advertisements)
https://www.fordbarn.com/forum/showthread.php?t=303452
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|