|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-27-2017, 04:30 PM | #1 |
Junior Member
Join Date: Jan 2012
Location: Beulah, Michigan
Posts: 24
|
Hairline crack on back of ignition switch
Found a hairline crack in the bakelite on the back of a 36 ignition switch. Crack is noticeable on the inside but not on the outside. Apparently the two screws that hold the bakelite and the two brass posts in place were tightened too tight. Would this cause some ignition problems I'm having?
DK |
|
|
Sponsored Links (Register now to hide all advertisements) |
|