Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-12-2021, 08:47 PM   #1
callbald
Senior Member
 
callbald's Avatar
 
Join Date: Jan 2014
Location: Leo, Indiana
Posts: 235
Default 64 Galaxie 289 water pump pulley

I am converting from manual to Borgeson P/S. Do I need to replace the water pump pulley from 1 to 2 belt grooves. to match the new crank 2 groove pulley.
Original 1st crank groove drives the generator and water pump.

The second crank pulley would idle off the water pump and drive the P/S pump.
Or can I go directly from the crank pulley to the P/S pulley and leave the water pump pulley as is.
callbald is offline   Reply With Quote
Old 10-12-2021, 08:54 PM   #2
craig
Senior Member
 
Join Date: May 2010
Location: The Inland Empire of Washington State
Posts: 368
Default Re: 64 Galaxie 289 water pump pulley

Sponsored Links (Register now to hide all advertisements)
I'd leave the w/p as is. My original set up is that way
craig is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:00 AM.