|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-22-2014, 09:17 PM | #1 |
Member
Join Date: Apr 2012
Location: N.W. Hoosierland
Posts: 45
|
29 closed cab windshield
On a 29 closed cab pick-up does the windshield hinge mount into a piece of wood inside "header" metal or is it nut and bolted?
__________________
C1-C2 |
09-23-2014, 04:35 AM | #2 |
Member
Join Date: Dec 2011
Location: Covington Twp Pa
Posts: 98
|
Re: 29 closed cab windshield
Nut and bolted to header
|
Sponsored Links (Register now to hide all advertisements) |
|
09-23-2014, 06:46 AM | #3 |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
Re: 29 closed cab windshield
Sponsored Links (Register now to hide all advertisements)
A lot, perhaps most Model A commerical cowls still have this stationary hinge in place. This to include the 150A station wagon, and the 79A panel delivery. Besides the usual identifiers such as tapered end to the wind baffle and the height/protrusion of the adjust arms landing bracket, the 28-29 commercial windshields have an unusual hole through the windshield to mount a hand wiper - unusual in that the hole has an integral sleeve which acts as bearing for the wiper shaft. Joe K
__________________
Shudda kept the horse. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|