11-29-2020, 09:44 AM | #1 |
Member
Join Date: May 2010
Location: Clermont FL
Posts: 99
|
Cam Gear Noise
I have finally determined that the noise i have been hearing is cam gear noise. it happens at about 2000 RPM under light load. I'm using the aluminum gear. Ford used a fiber gear to eliminate the noise. my questions are:
1) is this common? 2) is this something i should be concerned about or just let it annoy me. |
11-29-2020, 09:50 AM | #2 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,841
|
Re: Cam Gear Noise
Never heard cam gear noise, not sure what can cause it. But, someone here will know.
Gramps |
Sponsored Links (Register now to hide all advertisements) |
|
11-29-2020, 12:40 PM | #3 |
Senior Member
Join Date: Apr 2019
Location: Kansas
Posts: 897
|
Re: Cam Gear Noise
I'm trying to figure why light load would change the noise if it's cam/crank gear related. There is so little difference in loading on the cam and gears whether or not the engine is loaded,accelerating or decelerating. I guess a backlash check and gear inspection might tell something, but cross your fingers...
Terry
__________________
"It don't take but country smarts to solve the problem" (Smokey Yunick) '41 Merc Town Sedan / 260" 8CM engine '66 Fairlane four door / "warmed up" 302 |
11-29-2020, 04:20 PM | #4 |
Senior Member
Join Date: May 2010
Location: Liberty, KY
Posts: 896
|
Re: Cam Gear Noise
If there is no fillings in your oil at change then your exhaust is too quite!
|
11-29-2020, 04:33 PM | #5 |
Senior Member
Join Date: May 2010
Location: Cincinnati, OH
Posts: 1,356
|
Re: Cam Gear Noise
Also you may have to check the length of the four bolts that secure the gear to the camshaft, making sure one or all four don’t stick out the back side too much. The front block plug is also in this area.....make sure it’s flush with the block.
__________________
VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com |
11-29-2020, 06:51 PM | #6 |
Senior Member
Join Date: Aug 2012
Location: Perth, Western Australia
Posts: 2,687
|
Re: Cam Gear Noise
Sponsored Links (Register now to hide all advertisements)
__________________
"Came too close to dying to stop living now!" |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|