|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-09-2014, 09:46 PM | #1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Rear Brake Camshaft Lever ID...
I have a small selection of Rear Brake Camshaft Levers, A-2235.
All the ones for the LEFT side are marked with a "L". However there are some without any markings... I am guessing that these are for the Right side? Did the Right levers have no markings to distinguish them from Right and Left? Thanks. Pluck |
02-10-2014, 12:45 AM | #2 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,552
|
Re: Rear Brake Camshaft Lever ID...
Pluck
all the A-2235 and A-2236 I have seen, none of them are marked left or right, at times I wish they were, if you are not paying attention when you are putting them together you can get them on the wrong side however the emergency brake arms on the rear backing plate are marked R or L . John |
Sponsored Links (Register now to hide all advertisements) |
|
02-10-2014, 01:41 AM | #3 |
Senior Member
Join Date: Jan 2011
Location: New Zealand
Posts: 665
|
Re: Rear Brake Camshaft Lever ID...
I have only seen Rear Brake Camshaft Levers, A-2235 with a 'L'. never ever seen a 'R', although I have heard they do exist.
__________________
R.H.D. Author of Model 'A' Ford technical manuals. Supplier of good original RHD parts. |
02-10-2014, 11:28 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Diego, CA
Posts: 1,486
|
Re: Rear Brake Camshaft Lever ID...
On my E-28 rear levers, one has an "L" and the other a "R."
|
02-10-2014, 11:59 AM | #5 |
Senior Member
Join Date: May 2010
Location: Kenosha, WI
Posts: 1,001
|
Re: Rear Brake Camshaft Lever ID...
Hi,
I two sets of 31 NOS rear brake camshaft levers. One set has R and L and the other has LH and R. Interesting |
02-10-2014, 12:10 PM | #6 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: Rear Brake Camshaft Lever ID...
Sponsored Links (Register now to hide all advertisements)
The ones I've looked at were marked. If it's a good one...I'd use it.... |
02-10-2014, 12:11 PM | #7 |
Senior Member
Join Date: Sep 2010
Location: michigan
Posts: 1,126
|
Re: Rear Brake Camshaft Lever ID...
This is really neat !!thanks for sharing this is a great note to put in your own reference book THANKS!!
|
02-10-2014, 04:23 PM | #8 |
Member
Join Date: May 2010
Location: duncan BC canada
Posts: 63
|
Re: Rear Brake Camshaft Lever ID...
i put a set of them on my front brakes ,had to make bushings because the hole is bigger . works good more leverage
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|