The Ford Barn

365356 · 02-27-2011, 02:36 PM

Does anyone have a source for thrust washers for a '56 Fordomatic (small case)? I need the brass thrust washers that separate several sections of the transmission. Specifically, I need the secondary thrust washer. Mine is trash, when rebuilding, the thing fell out in several pieces. Unfortunately, it doesn't look like these things are part of the rebuild kits. If I can find them, I'd like to replace them all.

365356 · 02-27-2011, 02:36 PM

By the way, thanks in advance!

Mac VP · 02-27-2011, 03:33 PM

I have a box full of odd Ford thrust washers. I'm pretty sure some of these are for the Fordomatic trans. Problem is that there are virtually no part numbers to ID these. If you have OD, ID, thickness, and any identifying characteristics to the washer, I might be able to locate what you need.

365356 · 02-27-2011, 03:44 PM

Sponsored Links (Register now to hide all advertisements)

Thanks a million! I have a decent half of the thing left . I can try to measure that side of it and maybe sketch of what I think the other side looked like. I'll call tomorrow!!

02-27-2011, 02:36 PM	#1
365356 Junior Member Join Date: Feb 2011 Location: Augusta, GA Posts: 23	Fordomatic thrust washers Does anyone have a source for thrust washers for a '56 Fordomatic (small case)? I need the brass thrust washers that separate several sections of the transmission. Specifically, I need the secondary thrust washer. Mine is trash, when rebuilding, the thing fell out in several pieces. Unfortunately, it doesn't look like these things are part of the rebuild kits. If I can find them, I'd like to replace them all.

02-27-2011, 02:36 PM	#2
365356 Junior Member Join Date: Feb 2011 Location: Augusta, GA Posts: 23	Re: Fordomatic thrust washers By the way, thanks in advance!

02-27-2011, 03:33 PM	#3
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,361	Re: Fordomatic thrust washers I have a box full of odd Ford thrust washers. I'm pretty sure some of these are for the Fordomatic trans. Problem is that there are virtually no part numbers to ID these. If you have OD, ID, thickness, and any identifying characteristics to the washer, I might be able to locate what you need. __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

02-27-2011, 03:44 PM	#4
365356 Junior Member Join Date: Feb 2011 Location: Augusta, GA Posts: 23	Re: Fordomatic thrust washers Sponsored Links (Register now to hide all advertisements) Thanks a million! I have a decent half of the thing left . I can try to measure that side of it and maybe sketch of what I think the other side looked like. I'll call tomorrow!!