30 AA Rear Brake Assembly

[spdway1]

I am in the process of putting my '30 AA rear service and emergency brakes back together after rebuilding my rear end.
Every part has been removed, blasted, primed, painted and bushings installed.
I am trying to avoid doing things more than once!
Are there a step by step instruction someplace to help me out
Thank you.

[Bob C]

I don't know about instructions but I found these pictures somebody posted.

Bob

[Tom Wesenberg]

I had to use a hand held belt sander to thin the lining a bit. The new lining was too thick for the drum to slip on. That was also a 1930 AA I was working on.

[Doug in Maryland]

Sponsored Links (Register now to hide all advertisements)

I agree with Tom. The emergency brake lining is too thick as it is and will need to be sanded thinner in order for the drum to go on. A pain but at least we can get the lining!