|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-17-2021, 09:04 PM | #1 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,548
|
adding front springs finally-check me
Hi All,
I am going to try and install the front springs on Tuesday. So please check my procedures and let me know if I missed anything. 1) Install the spindle on the upper control arm 2) compress spring 3) Install spring in the frame-rubber frame/spring cap is already in 4) raise lower control arm and orientate the spring so the last coil sits in the arm correctly 5) bolt lower arm to spindle 6) tighten both arms down-release spring compressor 7) All doing this very quickly and safely Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|