|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-16-2016, 11:11 AM | #1 |
Senior Member
Join Date: May 2010
Location: California
Posts: 977
|
Engine Power update
I replaced the cracked B intake manifold with an A intake manifold. I was able to surface the intake and exhaust manifolds myself on my 3-1 Shoptask, with lots of time spent setting it up. I had a local club member bore out the throat of the A intake manifold to B size. When installed it runs a lot better. 1-2 are pulling their weight.
Thanks too all that had suggestions. Here is a link to the previous discussion on the problem http://www.fordbarn.com/forum/showthread.php?t=202302 Bob |
08-16-2016, 12:25 PM | #2 |
BANNED
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
|
Re: Engine Power update
thanks for the closure, which we seldom get
__________________
'31 180A |
Sponsored Links (Register now to hide all advertisements) |
|
08-16-2016, 01:27 PM | #3 |
Senior Member
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
|
Re: Engine Power update
Sponsored Links (Register now to hide all advertisements)
Seems the OP said there was no intake leak. Several fellas still asked about that. Most of these problems do turn out to be simple, these are simple cars. Its nice when all 4 holes are pulling their weight. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|