Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-05-2019, 03:16 PM   #1
foxfire42
Senior Member
 
foxfire42's Avatar
 
Join Date: May 2010
Location: AZ and WA
Posts: 764
Default Question on Floor Plate screws

I don't have my Standards with me. What finish should the screws have on the steering column floor plates?
foxfire42 is offline   Reply With Quote
Old 01-05-2019, 04:50 PM   #2
Stew Masche
Senior Member
 
Stew Masche's Avatar
 
Join Date: Feb 2014
Location: Lake Mills, WI
Posts: 251
Default Re: Question on Floor Plate screws

Sponsored Links (Register now to hide all advertisements)
Hi Barb!

The Judging Standards say , " All two piece metal plates were fastened with two #12-24
x 1/2" screws with #10 oval heads one #6 x 3/4" oval head wood screw and countersunk trim washers. The screws and washers were either nickle plated or raven finished."
__________________
Always one bad decision away from a good time.
Stew Masche is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:44 PM.