Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-22-2015, 04:46 AM   #1
roddyb34
Senior Member
 
roddyb34's Avatar
 
Join Date: Aug 2010
Location: Geelong Australia
Posts: 119
Default 35 front brakes on 32-34 spindles

Just seeing if I can put 35 type front brakes on 32-34 spindles ,,,also is there a difference in 36 spindles ,,,? Thanks from Rod ,,,
roddyb34 is offline   Reply With Quote
Old 09-22-2015, 07:26 AM   #2
48-710
Senior Member
 
Join Date: May 2010
Location: Mildura ,Australia
Posts: 163
Default Re: 35 front brakes on 32-34 spindles

G'Day Rod,
There is a difference between '35 and '36 spindles.The spacing between the tie rod holes on the '36 LH spindle is wider by about a 1/2 inch and the spindle length is around a 1/4 of an inch shorter than the '35 one . I'm not sure about the brake bits fitting though.
48-710 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-24-2015, 04:29 AM   #3
roddyb34
Senior Member
 
roddyb34's Avatar
 
Join Date: Aug 2010
Location: Geelong Australia
Posts: 119
Default Re: 35 front brakes on 32-34 spindles

Thanks for that ,,,I had seen that the 36 type are slightly different ,,I am after a set of 35 RHD ,,so I hope I can recognise them ,,,regards Rod,,
roddyb34 is offline   Reply With Quote
Old 09-24-2015, 06:09 AM   #4
tub1
Senior Member
 
tub1's Avatar
 
Join Date: May 2010
Location: tasmania
Posts: 221
Default Re: 35 front brakes on 32-34 spindles

hello Rod is it the wider drums you are after?
tub1 is offline   Reply With Quote
Old 09-24-2015, 07:02 AM   #5
CT AV8
Senior Member
 
CT AV8's Avatar
 
Join Date: Sep 2010
Location: Cos Cob, CT
Posts: 295
Default Re: 35 front brakes on 32-34 spindles

Rod, you can put the '35 front brakes on '32-'34 spindles but you will need the spacer normally used for a juice brake installation.
CT AV8 is offline   Reply With Quote
Old 09-24-2015, 07:12 AM   #6
CT AV8
Senior Member
 
CT AV8's Avatar
 
Join Date: Sep 2010
Location: Cos Cob, CT
Posts: 295
Default Re: 35 front brakes on 32-34 spindles

Sponsored Links (Register now to hide all advertisements)
Rod, I got mine from MT Car Products and they're called
1928-1934 Front Spindle Adapters, $20 plus shipping for the pair.
CT AV8 is offline   Reply With Quote
Old 09-25-2015, 05:44 AM   #7
roddyb34
Senior Member
 
roddyb34's Avatar
 
Join Date: Aug 2010
Location: Geelong Australia
Posts: 119
Default Re: 35 front brakes on 32-34 spindles

Thanks for the info ,,,
roddyb34 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 08:10 AM.