The Ford Barn

Flat32 · 07-14-2016, 06:06 PM

I'm far from home and in need of a couple split valve guides, mushroom valves and springs. Used, but serviceable is fine. Want to pick up local in Bloomsburg, PA area or Chester, NJ area.

Flat32

JM 35 Sedan · 07-14-2016, 07:52 PM

Hello Flat32,
I just sent you a pm and an email regarding this post, and the parts you are in need of. Maybe you could respond back to me as well as posting some additional information here on your current situation and the reason for your needs.

VeryTangled · 07-14-2016, 08:22 PM

Hi Everyone, Flat32, Busy Fri, but got time on Sat-Sun. Outside of DC which means Jersey is, um, sorta close, not. JM is a very valuable and special resource, and is in the NE corner of MD, so let him, and us know what's going on and what your status is?

Start us with your block/engine vintage, and add-on list, so we can get the gear together to help get you off the east coast.

Flat32 · 07-15-2016, 02:19 AM

Not urgent. Have a 1934 coupe and 1934 stock engine partially torn down. Would like to get engine together and running during a one or two day trip to NJ where car is being prepped for sale. In Bloomsburg, PA now.

Brother mucked up a valve, spring and guide taking the engine apart 20 years ago.

Don't know where the Flathead guys are hiding around these areas.

Flat32

JWL · 07-15-2016, 06:34 AM

I have new split guides and valves if you can wait for mail delivery.
JWL

Walt Dupont--Me. · 07-15-2016, 07:06 AM

Sponsored Links (Register now to hide all advertisements)

I have good used valves--Guides and springs, If you get used guides make sure there in pairs, cain't mix up the guide pairs. Let me know where to send them. Walt

Flat32 · 07-15-2016, 09:34 AM

Walt, I sent you a PM.

Flat32

07-14-2016, 06:06 PM	#1
Flat32 Member Join Date: May 2010 Location: Federal Way, WA Posts: 95	Need early block valve and parts I'm far from home and in need of a couple split valve guides, mushroom valves and springs. Used, but serviceable is fine. Want to pick up local in Bloomsburg, PA area or Chester, NJ area. Flat32

07-14-2016, 07:52 PM	#2
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Need early block valve and parts Hello Flat32, I just sent you a pm and an email regarding this post, and the parts you are in need of. Maybe you could respond back to me as well as posting some additional information here on your current situation and the reason for your needs. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

07-14-2016, 08:22 PM	#3
VeryTangled Senior Member Join Date: May 2010 Location: (Not far enough...) Outside of DC Posts: 3,387	Re: Need early block valve and parts Hi Everyone, Flat32, Busy Fri, but got time on Sat-Sun. Outside of DC which means Jersey is, um, sorta close, not. JM is a very valuable and special resource, and is in the NE corner of MD, so let him, and us know what's going on and what your status is? Start us with your block/engine vintage, and add-on list, so we can get the gear together to help get you off the east coast. __________________ -Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum?

07-15-2016, 02:19 AM	#4
Flat32 Member Join Date: May 2010 Location: Federal Way, WA Posts: 95	Re: Need early block valve and parts Not urgent. Have a 1934 coupe and 1934 stock engine partially torn down. Would like to get engine together and running during a one or two day trip to NJ where car is being prepped for sale. In Bloomsburg, PA now. Brother mucked up a valve, spring and guide taking the engine apart 20 years ago. Don't know where the Flathead guys are hiding around these areas. Flat32

07-15-2016, 06:34 AM	#5
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: Need early block valve and parts I have new split guides and valves if you can wait for mail delivery. JWL

07-15-2016, 07:06 AM	#6
Walt Dupont--Me. Senior Member Join Date: May 2010 Location: Gardiner Me. Posts: 4,200	Re: Need early block valve and parts Sponsored Links (Register now to hide all advertisements) I have good used valves--Guides and springs, If you get used guides make sure there in pairs, cain't mix up the guide pairs. Let me know where to send them. Walt

07-15-2016, 09:34 AM	#7
Flat32 Member Join Date: May 2010 Location: Federal Way, WA Posts: 95	Re: Need early block valve and parts Walt, I sent you a PM. Flat32